Hazari Impex


Company Profile

Business Type: Supplier, Trader
Main Products: silicone,loctite,crcs,air-freshners,spray-paints,fibre disk, ambersil, araldite, etc
Annual Revenue: US$50 Million - US$100 Million
Plant Area: 30,000-50,000 square meters
Accepted Payment Modes: USD, EUR, HKD
Average Lead Time: 32 days
Certification: ISO14001, ISO14001

We are Hazari Impex based in Karachi, Pakistan. We are member of Tradekey.com since April, 2010. Our business is related to Industrial Machinery industry and we specifically deal in silicone,loctite,crcs,air-freshners,spray-paints,fibre disk, ambersil, araldite, etc. Please find our product details below:Sell Polyester ResinPlyester Resin Available in Bulk Packing at very resonable prices.POLYESTER RESIN MSDS 1. Chemical Product and Company IdentificationManufacturer : Premier Coating Resins (Pvt) Ltd.Product name : Saturated Polyester Resin Chemical Family/use : Polymer Resins/ Chemical IntermediateCAS Number : Emergency telephone number Ph: 0092-21-8202193 2. Composition/Information on IngredientsName Cas # % byWeight Polyester ResinMonomers - 90-1000-10 3. Hazards Identification Physical State and Appearance : Solid Granular Physical hazard : Powdered material may form explosive dust-air mixtures. Slippery, can cause fallsPotential Acute Health Effects- Routes of Entry : Skin, eyes and respiratory tract.- Skin contact : MAY CAUSE SKIN IRRITATION. Contain substance (s) that may produce burns. Avoid contact with skin.- Eye Contact : May cause eye irritation. Contains substances that could cause possible burns. - Inhalation : CONTAINS MATERIAL THAT MAY CAUSE ALLEGIC RESPIRATORY TRACT REACTION.- Ingestion : Harmful if swallowed. Contain substance(s) that may cause burns to mouth, throat and stomach4. First Aid Measures- Skin contact : After contact with skin, wash immediately with plenty of water. Wash gently the contaminated skin with running water and non-abrasive soap- Eye Contact : Immediately flush eyes with running water for at least 15 min., keeping eyelids. open Seek immediate medical attention.- Inhalation : Remove victim from area of exposure if possible. Allow the victim to rest in a well-ventilated area. Seek immediate medical attention. - Ingestion : Do not induce vomiting unless directed by a physician. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as collar. tie, belt or waistband. If vomiting occurs, keep head lower than hips to help prevent aspiration.5. Fire Fighting MeasuresFlammability : Not available.Extinguishing Media : SMALL FIRE: Use dry chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jetSpecial fire-fighting procedures : Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.Unusual fire/explosion hazards : In case of fire toxic fumes might be formed. In case of fire and/ or explosion do not breathe fumes. Containers may rupture from pressure build- up Hazardous thermal decomposition : Possible Product of combustion: carbon oxides (CO, CO2)ProductsProtection of fire-fighters : Be sure to use an approved, certified respirator or equivalent.Auto-ignition Temperature : Not determined.Lower explosion limit : Not determined.6. Accidental Release MeasuresSmall spill and leak : Wear appropriate protective clothing to prevent skin contact. Wear appropriate respirator when ventilation is inadequate. Avoid breathing vapors of this product. Avoid contact with skin and eyes. Avoid all possible sources of ignition (spark or flame). Keep unnecessary people away from spill area. Clean up spills immediately. Absorb with liquid-binding material (sand, universal binders, or spill kit). Place in suitable clean, dry containers for disposal by approved methods.Large spill and leak : Do not clean-up or dispose except under supervision of a specialist. Eliminate all ignition sources. For large spills like spilled material or otherwise contain material to ensure runoff does not reach a water way. Keep unnecessary people awayfrom spill area. Follow company spill response procedures. Clean up spills immediately. Wear protective eyeglasses or chemical safety goggles and face protection. Contact lenses are not protection devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses . Wear approved self contained breathing apparatus or equivalent and full protective gear. Wear appropriate protective clothing to prevent skin contact. Place spilled material in an appropriate container for disposal Dispose off according to all federal, state and local applicable regulations.7. Handling and StorageHandling : Avoid contact with eyes, skin and clothing. Avoid breathing dust. Wash thoroughly after handling. Ground and bond containers when transferring material to prevent dust explosion. Minimize dusty generation and accumulation.Storage : The resin should be stirred in the original, unopened and undamaged container in a dry place at storage temperature between 25-30ËšC Exposure to direct sunlight should be avoided.8. Exposure Control/Personal ProtectionOccupational Exposure limits : None establishedEngineering Controls : Use process enclosures, local exhaust ventilation, or other engineering controls to keep air borne levels below recommended exposure limits. If user operation generate dust fume or mist, use ventilation to keep exposure to air borne contaminants below the exposure limit. Avoid dust accumulation.Personal Protection Ventilation : Good general ventilation should be sufficient to control air borne levels.Respiratory System : Wear appropriate respirator when ventilation is inadequate.Skin Contact : Use chemical resistant, impervious gloves, work uniform or laboratory coat.Eyes : Safety glasses with side shields or chemical splash goggles.Other Information : Not available.9. Physical and Chemical PropertiesPhysical State and Appearance: Solid Granular.Color : Colorless /pale yellowOdor : OdorlessBoiling Point : Not determinedSpecific Gravity : 1.18(Water1)10. Stability and ReactivityStability : The product is stable.Hazardous Polymerization : Not likely under normal conditionsIncompatibility, conditions to avoid, : Not availableMaterials to avoidHazardous Decomposition Products : Possibly hazardous short term degradation products are not likely. However. long term degradation products may arise.11. Toxilogical Information Routes of Entry Skin, eyes and respiratory tract.Toxilogical Acute oral toxicity (LD50):940 mg/kg[Rat]. (Adipic Acid)Information Acute dermal toxicity (LD50) : 7940 mg/kg [Rabbit] (Adipic Acid) Acute toxicity of the gas (LC50):2330 mg/m3 8 hr(s) [Rat](Trimellitic anhydride) Acute toxicity of the dust (LC50) : 7.7 mg/l 4 hr.(s) [Rat]. (Adipic Acid) Ethylene Glycol: Additional acute toxicity information, Oral TDLo: 5500mg/kg (child) Inhalation TCLo: 10000 mg/m3 (human), Estimated lethal dose: 100ml (human) Irritation Data:Skin: 555mg (open)-mild (rabbit), Eye: 100 mg/1h-mild (rabbit), Eye:1440mg/6h-moderate(rab-bit)Eye: 500 mg/24h-mild (rabbit), Eye 12 mg/m3/3D (rabbit) Chronic Health Effects:Substance is reproductive effectors in rats. Mutagenic to Rat cells. Exposure to the material for prolonged periods may cause physical defects in the developing embryo (teratogensis)Trimellitic Anhydride: Acute or chronic overexposure may cause systemic toxicity, including adverse effects to the eyes, skin and respiratory tract. It is an irritant and respiratory sensitizer.EFFECTS ON THE HUMAN:TMA inhalation by humans can cause respiratory irritation, which is generally accompanied by coughing and nasal discharge, and can occur immediately upon a moderately heavy exposure to TMA. In susceptible individual, repeated inhalation of TMA can cause respiratory sensitization that may result in one of the following syndromes.1. Immediate onset asthma/ rhinitis; This response occurs in sensitized individuals, typically within minutes of exposure and can include coughing, tightness in the chest, wheezing due to constriction of the airways, and sneezing. Symptoms may range from mild to severe. Recovery is generally rapid and complete following termination of exposure. Medical therapy, such as is routinely given for asthma, may be necessary.2. Late onset respiratory systemic syndrome (TMA flu): This response occurs in sensitized individuals, typically from 4 to 8 hr(s) after exposure has ended. Symptoms are very much like influenza and include coughing wheezing, breathlessness, congestion, fever, chills, fatigue and generalized aching. Recovery usually occurs without treatment and generally is complete 6 to 12 hours after the onset of symptoms. Infrequently, respiratory symptoms can progress, requiring medical attention.3 . Hemoptysis and hemolytic anemia: This rare response has occurred in sensitized individuals exposed to TMA fumes and can result in severe symptoms (often requiring hospitalization) consisting of cough, breathlessness, impaired respiratory function, and anemia. Fumes are solid particles formed by condensation of the vapor resulting from heat vaporization of TMA. Chronic effects on CARCINOGENIC EFFECTS: Classified None. Human Remarks: Any information contained in this section is for component(s) contained in this product is not available. Acute effects on Contain substance(s) that may cause skin or eye burn, irritation and damage. humansRemarks: Any information contained in this section is for component(s) contained in this product is not available 12. Ecological Information Not Available 13. Disposal Considerations Waste Disposal : Disposal should be carried out in accordance with national and local regulations in an approved incinerator, consult local authorities for detailed advice. 14. Transport Information Not available 15. Regulatory Information Classification and Labeling. 16. Other Information Other special considerations : Not available.Uses : Saturated Polyester Resin is used in Powder CoatingsNotice to Reader To the best of our knowledge, the information contained herein is accurate. However, neither Premier Coating Resins or any of its affiliates assumes any liability whatsoever for the accuracy or completeness of the information contained herein. While this information has been prepared in good faith by technical experts within the organization, the final determination of suitability of any material is the sole responsibility of the end user, after proper consultation with the end users™ engineering, technical, health and safety professionals. All material may present unknown hazards and should be used with caution considering the specific material, other materials that it may or may not be combined with, and any engineering controls and/ or process implementation(s) designed for the use of the material in any specific system process. Although certain hazards are described within, these cannot be guaranteed as they only hazards that exist.Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.

Contact Us


* By joining ExportHub, I agree to Terms, Privacy Policy, IPR/DMCA Policy and Marketing Policy of Exporthub

Trade Capacity

Trade Capacity:
FOB, CFR, DDP
Terms of Payment:
T/T, D/P, PayPal
Terms of Payment:
32 days
Total Number of Employees:
501 - 1000 People
Overseas Agent/Branch:
Address
34/A Shabbirabad Hazari Mansion
Response Level:
Response Rate Response Time Rating Reviews
82% 24h-48h 1.1/5 67 Reviews
Company Name:
Hazari Impex
Membership Year:
2008
Membership:
2
Country and City:
Pakistan,Karachi
Year of Established:
2010
Main Markets:
South America 12% Africa 10% Eastern Asia 8% Domestic Market 8% North America 12% Eastern Europe 12% Southern Europe 12% Mid East 8% Northern Europe 12% Oceania 6%
Nearest Port:
Karachi

TradeShow

Tradeshow Title:
Canton Fair
Date Attended:
2019
Host Country:
China

Production Capacity

Factory Address:
Pakistan
No of R&D Staff:
501 - 1000 People
No. of Production Lines:
10
No. of Production Lines:
Below US$1 Million
Contract Manufacturing:
OEM Service Offered Design Service Offered Buyer Label Offered

Company Products

1 Item

silicone,loctite,crcs,air-freshners,spray-paints,fibre disk, ambersil, araldite, etc

Show More +

Company Contact

Company Contact:
Country:
Pakistan
Province:
Sindh
City:
Karachi
Fax:
92-021-32413827
Total Revenue:
US$1 Million - US$2.5 Million
Factory Location:
Pakistan
Total Export Revenue:
US$5 Million - US$10 Million
Trade Department Employees:
Above 1000 People
Registered Capital:
US$5 Million - US$10 Million
Registered Capital:
31% - 40%
Registered Capital:
LLC (Limited Liability Corp)