Emergency Lighting Installation

The original, emergency lighting installation is designed to illuminate large areas. These simple, reliable and easy-to-use ELG mobile lighting units with high efficiency are ideal for night work in industry, construction, in hard-to-reach places without the use of expensive equipment and qualified personnel.

The version of the lamp "transformer 5-7" meters allows, if necessary, to increase the height of the lamp from 5 to 7 meters high. This will increase the illumination radius by about 5 meters.

It is convenient to use a transformer up to 7 meters during loading and unloading operations, in open areas crowded with machines, equipment, materials in places such as freight railway stations, warehouses, sea and river ports, airports, terminals, etc.

The luminaire provides uniform illumination that does not dazzle the eyes, it is made of special fabric, (light column) the fabric cylinder is inflated by a pump and rises to a height of 5-7 meters. The shell material provides transmission and dispersion of the light flux. When folded, it takes up minimal space. The light source is a gas-discharge sodium lamp with a power of 1000 W. It is located at the top of the tissue cylinder. Lighting area up to 10000 sq.m.

The electrical part of the unit is located in a protective plastic case and has a modular design for ease of maintenance.

The protection of the installation during transportation has been significantly increased.

The energy consumption of the luminaire has been reduced with the use of more modern starting equipment.

Illuminated control buttons are located on a protective plastic case.

All models produced since 2015 have been upgraded. Illumination increased by 40%.

The installation is put into operation by one person in less than one minute.

The use of several AOUs at the same time makes it possible to achieve high illumination brightness.

All models are original products of Moscow production.

Main parameters and characteristics:

• Power supply - alternating current mains with voltage 220 V, frequency 50 Hz or from built-in gasoline 4-stroke power plant with Honda engine with power of 2.7 kW.

• Fuel consumption 0.8/1 l/h, fuel tank volume 3.6 l.

• Light source – 1000 W high-pressure discharge lamp, luminous flux – 150000 Lm, E40 cartridge.

• Increased illumination by 40%, due to the modernization of the lighting installation.

• Air blower - 1000 W., capacity 2.5 - 3.5 m3/min.

• Blowing time up to 30 sec., full warm-up time of the lamp - 3-5 min.

• Illumination of control buttons.

• Automatic maintenance of pressure in the light-optical part.

• Increased protection against dust and moisture.

• Improved protection of the lamp of the light-optical part when it falls.

• The body is made of high-strength material brand: Armlen PP TM 20-2UP.

• Packed dimensions with built-in power plant - 600x450x800 mm.

• The maximum installation height in working order is up to 7.0 meters.

• The minimum installation height in working order is up to 5.0 meters.

• Total weight with built-in power plant up to 74 kg.

• Wind resistance (with extensions) up to 25 m/s.

• Replacement of the air blower in connection with its replacement is carried out without dismantling the housing of the Lighting Unit.

• The blower brushes can be replaced without the use of tools.

• The protective cover of the lamp is located vertically and suspended on shock absorbers.

• The upper and lower parts of the light-optical shell are reflective.

• Adjustment of the height of the Lighting installation is carried out with the help of a one-piece zipper type 10 (width 10 mm).

• The vertical seam in the light-optical shell is sewn and made with a connecting line "polygonal zigzag".

• Light distribution class P according to GOST 17677.

• Class of protection against electric shock I or II.

• Degree of protection IP 65/44.

• Climatic version U, placement category 1 according to GOST 15150.

• Temperature regime -40+60.