Looking For ISOKF Vacuum Center Ring Viton Oring Vacuum Fittings

RFQ Description

N Description pcs Specifications 1 Adapter PCS 2 - Material: Stainless steel 304L; - Limit pressure: 10E-8 Torr; - Operating temperature: <= 200 ° C; - Connection flange: KF16; - Thread: 1/4 pipe "type VCR « male "; - Dimensions: length not exceeding 38 mm. 2 Adapter PCS 2 - Material: Stainless steel 304L; - Limit pressure: 10E-8 Torr; - Operating temperature: <= 200 ° C; - Connection flange: KF16; - Thread: 1/4 pipe "type MVCR « female "; - Dimensions: length not exceeding 38 mm. 3 Adapter PCS 2 - Material: Stainless steel 304L; - Limit pressure: 10E-8 Torr; - Type of connection: quick connector QC - Operating temperature: from -20 ° C to 150 ° C; - Connection flange: KF25; - Dimensions: length 40 mm. 4 Adapter PCS 3 - Material: Stainless steel 304L; - Limit pressure: 10E-8 Torr; - Type of connection: quick connector QC - Operating temperature: from -20 ° C to 150 ° C; - Connection flange: KF25; - Dimensions: length not exceeding 50 mm. 5 Adapter PCS 25 - Material: Stainless steel 304; - Ultimate pressure: not less than 10E-8 Torr; - Operating temperature: from -20 ° C to 150 ° C; - Connection flanges: KF16, KF25 6 Adapter PCS 8 - Material: Stainless steel 304; - Ultimate pressure: not less than 10E-8 Torr; - Operating temperature: from -20 ° C to 150 ° C; - Connection flanges: KF40, KF25 7 Entering vacuum PCS 2 - Vacuum contacting under ring coupling with 10 contacts (pins) - Flange ISONW40KF - shell material: Steel 304 - pins Material: steel coated with gold 300 - Insulator: Glass-Ceramic - Maximum voltage: 1000 V; - Maximum current: 5 A (per contact); -Temperature in the range from -25 C till 205C 8 Entering vacuum PCS 2 - Vacuum contacting under ring coupling with 19 contacts (pins) - Flange ISONW40KF - shell material: Steel 304 - pins Material: steel coated with gold 300 - Insulator: Glass-Ceramic - Maximum voltage: not less than 1 000 V; - Maximum current: at least 5A (per contact); -Temperature in range in the range from -25 to +205 C 9 Entering vacuum PCS 2 - Vacuum contact with 1-m pin - Flange ISONW25KF - Unprotected insulator - pin Material: Nickel - Insulator: aluminum ceramics - shell material: Steel 304 - Maximum voltage: not less than 20 000; - Maximum current: Not less than 16.5 A; -Temperature in range: -25 to +205 C 10 Valve PCS 2 - Case Material: Steel 304 - Cover Material: steel 304 - Seat seal: Screw ring - The quantity of: better than 2 x 10 -9 std. cm ^ 3 / s - Pressure range: from 10 ^ -9 Torr to 760 Torr - Maximum difference in pressure before opening: 1.2 bar - Maximum preheating temperature: 150 ° C with screw cap seal 200 ° C with a copper gasket - The distance from the flange to the flow cross section perpendicular to the axis of the flange located 50 mm - The distance from the flange of the valve in the open position open: no more than 148.1 mm - Diameter of the handle: 57 mm max - Type of valve: angle - Straight diameter: not less than 25 mm - Flange Type: KF25 - Drive Type: manual 12 Valve PCS 6 - straight-through valve with bellows seal - Drive Type: manual - Maximum pressure drop before the opening: 1.2 bar - Seal: Viton - Case Material: Steel 304 - leakage flow: 2 x 10 -9 st.sm ^ 3 / s - Operating pressure in the range from 2 x 10 -9 to 760 torr - Connection flanges: KF25 - Diameter: 3/4 " 12 Valve needle PC 4 - The pressure is not less than 414 bar at 38 ° C - temperature range from -54 ° C to + 315 ° C - Option: temperature up to -60 ° C - Cv flow coefficient from 0.09 to 1.80 - diameter: not less than 3 mm 13 Valve needle PCS 3 - The pressure is not less than 414 bar at 38 ° C - temperature range from -54 ° C to + 315 ° C - Option: temperature up to -60 ° C - Cv flow coefficient from 0.09 to 1.80 - Connection: NPT 1/8 " 14 Valve needle PCS 2 - Valve with test connection separately isolated - Operating pressure: not less than 400 bar - Case Material: stainless steel. steel - Thread: G ½ - Working temperature range: -20 to +200 C 15 Cap PCS 25 - Outer diameter: not more than 30 mm; - flange KF16 - Material: Stainless Steel; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; 16 cap PCS 30 - Outer diameter: 40 mm; - Material: Stainless Steel; - flange KF25 - Range of working temperature: 150 ° C; - Maximum operating pressure: not less than 10E-8 Torr; 17 Cap PCS 30 - Material: Plastic; - Outer diameter: not more than 57 mm - Inner diameter: not menee55 mm 18 shutter vane (louvre gate) PCS 3 - Flanges: CF63 - Material housing, a carriage drive: stainless steel SUS304; - sealing the seal surface material: FKM (Viton) - shutter driving flange seal material: oxygen-free copper OFHC - valve shaft Drive bellows; - shutter driving type: Manual; - Pressure range: 7.5h103 - 1x10-10 Torr; - The temperature of warm (when closed shutter): not less than 150 ° C; - Inleakage of helium (at a pressure differential 7.5h103 Torr.): Not more than 5 × 10-10 st.sm3 / sec nineteen Valve vacuum KF40 PCS 4 - Line-powered valve - Case Material: Stainless steel 304; - Seal: Viton O-ring; - leakage flow: 2 × 10E-9st.m.kub / s; - Pressure range: from 2100 to 10-9 torr; - Maximum pressure before opening: 1.2 bar; - Connection flanges: KF40; - Length: not less than 130 mm; - Height: less than 123 mm; - Rod Seal: stainless steel bellows Am350; The maximum pressure drop across the opening: 750 Torr; - Operating temperature: 150 ° C 20 Valve vacuum cocurrent KF25 PCS 4 - Case Material: Stainless steel 304; - Seal: Viton O-ring; - flux leakage not worse than 2 × 10E-9 st.m.cub / s; - Pressure range: from 2100 to 10-9 torr; - Maximum pressure before opening: 1.2 bar; - Connection flanges: KF25; - Length: not less than 107 mm; - Height: 100 mm; - Rod Seal: stainless steel bellows Am350 Maximum differential pressure at the opening of 750 torr - Operating temperature: 150 ° C 21 Valve vacuum angular KF25 PCS 5 - Valve with test connection separately isolated - Operating pressure: not less than 400 bar - Case Material: stainless steel. steel - Thread: G ½ - Working temperature range: -20 to +200 C 22 High-vacuum valve PCS 2 - Material: aluminum; - Seal: bellows; - Connection flanges: KF25; - Voltage: 24V DC 23 Straight-through valve PCS 4 - straight-through valve with bellows seal - Drive Type: manual - Maximum pressure drop before the opening: 1.2 bar - Seal: Viton - Case Material: Steel 304 - The flow of leakage: better than 2 * 10 ^ -9 st.sm ^ 3 / s - Operating pressure in the range from 2 x 10 -9 to 760 torr - Connection flanges: KF16 - Pipe: 3/4 " 24 The valve angle PCS 7 - Case Material: Steel 304 - Cover Material: steel 304 - Seat seal: Screw ring - The quantity of 2 x 10 -9 std. cm ^ 3 / s - Pressure range: from 10 ^ -9 Torr to 760 Torr - Maximum difference in pressure before opening: 1.2 bar - Maximum preheating temperature: 150 ° C with screw cap seal 200 ° C with a copper gasket - The distance from the flange to the flow cross section perpendicular to the axis of the flange located 50 mm - The distance from the flange of the valve in the open position: 148.1 mm - Diameter handle: not more than 57 mm; - Type of valve: angle - Straight diameter: not less than 25 mm; 25 The valve angle PCS 3 - Case Material: Steel 304 - Cover Material: steel 304 - Seat seal: Screw ring - The quantity of 2 x 10 -9 std. cm ^ 3 / s - Pressure range: from 10 ^ -9 Torr to 760 Torr with screw seal - Maximum difference in pressure before opening: 1.2 bar - Maximum preheating temperature: 150 ° C with screw cap seal 200 ° C with a copper gasket - The distance from the axis of the flange to the flow section situated perpendicular to the flange: 65 mm - The distance from the flange of the valve in the open position: 200 mm - Diameter of the handle: no more than 60 mm - Type of valve: angle - Straight diameter: not more than 39 mm - Flange Type: KF 40 - Drive Type: manual 26 The valve angle PCS 4 - Case Material: Steel 304 - Cover Material: steel 304 - Seat seal: Screw ring - The quantity of 2 x 10 -9 std. cm ^ 3 / s - Pressure range: from 10 ^ -9 Torr to 760 Torr with screw seal - Maximum difference in pressure before opening: 1.2 bar - Maximum preheating temperature: 150 ° C with screw cap seal 200 ° C with a copper gasket - The distance from the axis of the flange to the flow section situated perpendicular to the flange: 65 mm - The distance from the flange of the valve in the open position: 200 mm - Diameter handle: not more than 60 mm; - Valve type: angular; - Straight diameter: not more than 39 mm; - Flange type: CF 35; - Drive Type: Manual; 27 Corner valve with flanges PCS 2 - Drive Type: Manual; - Operational temperature range: 400 ° C; - Range of pressure Torr: 1 atm .. - <1 * 10 ^ -10; - Type of connection flanges: CF16; - Case Material: stainless steel. steel, electropolished; - Seal material: oxygen-free copper (OFHC); 28 The valve ball PCS 9 - Drive Type: manual - Casing material: 316 - pass valve, two-way - Working temperature range: from 10 to 65 C. - Operating pressure: not less than 206 bar - End connection: 6mm - Passing Diameter: 3.2 mm - Coefficient. Cv flow: 1.4 - Seal: PTFE 29 Solenoid valve PCS 20 Valve Type: normally closed Voltage: 24 V Connection: 1/4 " The maximum pressure difference is not less than 3 MPa Case Material: steel, stainless steel. steel Weight: not more than 620 g 30 Knee PCS 2 - Case Material: Steel 304 - Passing Diameter: 25.4 mm - The distance from the axis of the flange to the flow section situated perpendicular to the flange: 50 mm - Flange Type: KF 25 31 Knee PCS 4 - Case Material: Steel 304 - Straight diameter: not more than 9 mm - The distance from the flange to the flow cross section perpendicular to the axis of the flange located not less than 65 mm - Flange Type: KF 40 32 Ring PCS 40 - Case Material: Steel 304; - Seal material: Viton; - operating temperature: 150 C; - external diameter of the ring: not more than 26 mm; - inner diameter of the ring: not less than 25 mm; - Seal diameter: 3.9 mm; 33 Ring PCS 2 - Case Material: Steel 304; - Seal material: Viton; - operating temperature: 150 C; - external diameter of the ring: not more than 26 mm; - inner diameter of the ring: not less than 25 mm; - Seal diameter: 3.9 mm; 34 Ring centering KF10 PCS 35 - Material: Stainless steel 304; - Seal material: Viton; - Working temperature in range: -15 to +150 C 35 Ring centering KF16 PCS 35 - Case Material: Steel 304; - Seal material: Viton; - Working temperature in range: -15 to +150 C; - Seal diameter: not more than 4 mm; - Inner diameter of the ring: 16 mm; - Width: 8 mm; 36 Ring centering KF25 PCS 135 - Case Material: Steel 304 - Seal material: Viton - Working temperature range: -15 to +150 C - Seal diameter: 3.9 mm - inner diameter of the ring: 25 mm - Width: 8 mm 37 Ring centering KF40 PCS 40 - Case Material: Steel 304 - Seal material: Viton - Working temperature range: -15 to +150 C - Seal diameter: 3.9 mm - Inner diameter of the ring: 40 mm - Width: 8 mm 38 Ring centering KF40 PCS 5 - Case Material: Steel 304 - Seal material: Viton - Working temperature range: -15 to +150 C - Seal diameter: 3.9 mm - Inner diameter of the ring: 40 mm - Width: 8 mm 39 Cross pass PCS 2 - Material: Stainless steel 304; - Operating temperature: from -20 ° C to 150 ° C; - Outer diameter flange: 40 mm 40 Crossing PCS 7 - Flange Type: KF16 - Straight diameter: not less than 15.75 mm - Case Material: Steel 304 - Length: no more than 80 mm - The distance from the axis of the flange to the flow section situated perpendicular to the flange: 40 mm 41 Nipple KF16 PCS 10 - Case Material: Steel 304 - Length: 30 mm or less - Flange Type: KF 16 42 Nipple part KF40 PCS 5 - Length: 40 mm; - External tube diameter: 38.10 mm; - Material: Stainless steel 304; - Minimum working temperature: -10 ° C; - Maximum temperature: 150 ° C - Minimum operating pressure: 1E-8 Torr: 43 Pipe KF25 PCS 3 - Operating temperature range from -20 ° C to 150 ° C; - Material: Stainless steel 304; - Outer diameter flange: 40 mm; - The inner pipe diameter: 25.4 mm; - Dimension A: 19.58 mm. 44 Pipe KF25 PCS 2 - Material: Stainless Steel; - Connection flange: KF25; - external diameter of the flange diameter: 40 mm; - Inner Flange Diameter: 26.20 mm; - Length: not more than 320 mm; 45 Pipe KF25 PCS 2 - Operating temperature range from -20 ° C to 150 ° C; - Material: Stainless steel 304L; - Outer diameter flange: 40 mm; - Size A: 50 mm 46 Pipe KF25 PCS 3 - Case Material: Steel 304 - Length: 70 mm - Flange Type: KF 25 47 Pipe KF25 PCS 20 - Case Material: Steel 304 - Length: 70 mm - Flange Type: KF 25 48 Adapter conical KF40 / KF16 PCS 5 - Material: Stainless steel 304; - Limit pressure: 10E-8 Torr; - Operating temperature: from -20 ° C to 150 ° C; - Connection flanges: KF16, KF40; Description of the model: Material: Stainless steel 304; Ultimate pressure: 10E-8 Torr; Operating temperature: from -20 ° C to 150 ° C; Size Flange: KF40, KF16 49 Bellows PCS 3 - Valve material: 304 SS; - Flange diameter not less than 40 mm; - length of not more than 500 mm; - Flexible - Flange connection: KF25 50 Bellows PCS 2 - Valve material: 304 SS; - A: 30 mm (diameter flange); - B: 100 mm (length of the hose); - Flange connection: KF25; 51 Bellows with flange KF25 PCS 3 - Valve material: 304 SS; - Flange diameter not less than 40 mm; - length of not more than 250 mm; - Flexible - Flange connection: KF25 52 Connect cruciform PC 1 - Material: Stainless steel 304; - Operating temperature: from -20 ° C to 150 ° C; - external diameter of flanges 55 mm; - The distance between the flanges: 102.80 and 51.40 53 Tee PCS 3 - Case Material: Steel 304 - Length: no more than 80 mm - Flange Type: KF16 - Operating temperature: from -196 to 300 ° C - The distance from the flange to the flow cross section perpendicular to the axis of the flange located not less than 40 mm 54 Tee PCS 8 - Case Material: Steel 304 - Length: 100 mm - Flange Type: KF25 - Operating temperature: from -196 to 300 ° C - The distance from the axis of the flange to the flow section situated perpendicular to the flange: 50 mm 55 Tee PC 1 - Material: Stainless steel 304; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; - Straight flange: KF40 - Lateral flange: KF25 56 Tee PCS 2 - Outer flange diameter: 40 mm; - Material: Stainless steel 304; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; - Length: up to 100mm 57 Flange PCS 5 - Outer diameter: not more than 30 mm; - Material: Stainless steel 304; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; 58 Flange PCS 15 - Outer diameter: 40 mm; - Material: Stainless steel 304; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; 59 Flange PCS 3 - Outer Diameter: 54.86 mm; - Material: Stainless steel 304; - Range of working temperature: 150 ° C; - Maximum operating pressure: 10E-8 Torr; 60 Clamp PCS 35 - Material: aluminum coated with nickel; - Operating temperature: from -10 ° C to 150 ° C; - Limit pressure: 10E-8 Torr; - Length: no more than 63 mm; - Height: not more than 43 mm; - Width: 16 mm; 61 Clamp KF25 PCS 2 - Material: aluminum; - Operating temperature: from -10 ° C to 150 ° C; - Limit pressure: 10E-8 Torr; 62 Clamp PCS 20 - Casing material: aluminum; - Length: no more than 43 mm; - Height: not less than 63mm; - Width: 16 mm; - Ultimate vacuum: 10 ^ -8 torr; -Operating temperature: 150 C; 63 Clamp PCS 10 - Casing material: aluminum nickel; - Length: not more than 72 mm; - Height: not less than 54 mm; - Width: 16 mm; - To connect KF25 flanges - Ultimate vacuum: 10 ^ -8 torr; -Operating temperature: 150 C; 64 Clamp PCS 5 - Material: aluminum; - Operating temperature: from -10 ° C to 150 ° C; - Limit pressure: 10E-8 Torr; - To connect KF40 flanges 65 Flexible hose PCS 2 - Valve material: 304 SS; - Flange diameter not less than 30 mm; - length of not more than 1000 mm; - Flange connection: KF16 66 Hose flexible bellows PCS 2 - Case Material: Steel 304; - Diameter: not more than 55 mm; - Length: up to 2500 mm; - Flange Type: KF40; - A flexible bellows hose with braid; - Ultimate vacuum: 10 ^ -8 torr; -Operating temperature: 300 ° C 67 Hose bellows PCS 5 - Case Material: Steel 304; - Diameter: not more than 55 mm; - Length: not more than 250 mm; - Flange Type: KF25; - A flexible bellows hose with braid; - Ultimate vacuum: 10 ^ -8 torr; -Operating temperature: 300 C; 68 Hose bellows PCS 5 - Case Material: Steel 304; - maximum diameter not menee55 mm; - Length: less than 750 mm; - Flange Type: KF25; - A flexible bellows hose with braid; - Ultimate vacuum: 10 ^ -8 torr; -Operating temperature: 300 C; 69 Element reverse-osmotic Fimtec TW30 1812-75 PC 1 Capacity: at least 75-130 gallons / day