Dongguan Laser Technology Co. Ltd.

We are Dongguan Laser Technology Co. Ltd. based in Dongguan , China. We are member of exporthub.com since December, 2010. Our business is related to Electrical & Electronics Supplies industry and we specifically deal in laser marking/cutting/engraving machine. Please find our product details below:Fiber laser marking machineThe new generation of fiber laser marking system has the revolutionary ¼š 1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power consumption is low (160Q) ã€The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system. 2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation. Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time reaches 100, 000 hours; 3. Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperature　controller, the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system. pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46160250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power consumption is only 160W. Application Applicable materials: Metal/plastics/ Ceramics /paper/leather/ Coating glass /organic glass Applicable field: Craft presentã€Clothing leatherã€food & packingã€electronic component ã€automotive parts Parameter Power: Q10W Laser length: 1060nm Laser power: 20KHZ-80KHZ continual Power supply: Single phase AC 220V/50HZ-60HZ Electricity power: < 160W Machine dimension: 570mm×270mm×200mm Wet weight: < 22KG Focusing spot diameter: <0.01mm Marking area: 30mm/30mm-300mm/300mm optical Marking speed: > 800character/s Semiconductor life: > 500, 000 hour Marking depth: 0.01-0.2mm Operational system: Win98/Win2000/XP Cooling mode: Air cooling Controlling joint: Standard USB Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar code and so on); BMP/Belt 256 gradation images document and DXF/ and so on PCXPLT form vector graphic file Installation and training Qualified engineer will go to your company for installation and training free of charge. All expense related to this should be covered by buyer including air ticket, traffic in China, visa, lodging and board expense.Non-metal marking machineFEATURES¼š 1ã€Laser power is big 2ã€Power is controlled by software , and continuity. 3ã€Marking scope is large. 4ã€Marking is clearly , is not easy to wear ;the efficiency of cutting is high. 5ã€Engraving depth is at will. 6ã€THe cost is low and need not consumption materials.APPLICATION FIELD: Widely be used in the nonmetallic material , such as button , leather , lumber , plastic , electronic component, organic glass and gas cutting processing.TYPE:XGY-50 CO2 Laser-power: 60W Whole consumption power: 2KW Marking depth: <3mm <3mm <5mm <5mm <8mm Marking line width:<7000mm/s Min line speed:0.1mm/s Min character:0.40mm Repeat precision:±0.01mm Laser Length:10.6μm Laser repeat frequency:20KHZ-200KHZ Marking area:100100mm Electricity demand:220V/50HZ/8AFiber Laser Marking SystemFeatures:Before Fiber laser, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube(more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time can be up to 100, 000 hours; Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperature　control instrument etc., the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system. The pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46160250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off, the power consumption is only 160W.Fiber laser marking machineThe new generation of fiber laser marking system has the revolutionary ： 1. It has volume slightly, the semiconductor module has got long life (>500 thousand hours), the power consumption is low (160Q) ã€The beam quality is high, the USB connection, supports WIN98/2000/XP and other operating system. 2. It is not influenced by bad circumstance and temperature change; May use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation. Before Fiber laser appeared, laser marking system normally adopts Continuous or pulse output CO2 laser tube, ND-YAG Laser tube as laser source. Compared with traditional laser source, the performance of fiber laser is more excellent, Radiation angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking); the conversion efficiency of electro-optic is 1/10 of lamp pumped solid laser marker; The average working time reaches 100, 000 hours; 3. Fiber laser is a type of full air cooling, so it doesn’t need refrigerant device, freezing water pipe or temperature　controller, the volume is reduced, energy consumption is decreased, so the use cost of user is much lower than use cost of traditional laser marking system. pulse of ETL Fiber laser is 10-100KHz repeat frequency working, The volume of the fiber laser which average power output is 10W-20W is only 46160250cm, and weight is 10kg; Because laser diode is working in low voltage, the conversion efficiency of electro-optic is up to 70%, and driving power supply can use UPS power supply when the power is shut off the power consumption is only 160W. Application Applicable materials: Metal/plastics/ Ceramics /paper/leather/ Coating glass /organic glass Applicable field: Craft presentã€Clothing leatherã€food & packingã€electronic component ã€automotive parts Parameter Power: Q10W Laser length: 1060nm Laser power: 20KHZ-80KHZ continual Power supply: Single phase AC 220V/50HZ-60HZ Electricity power: < 160W Machine dimension: 570mm×270mm×200mm Wet weight: < 22KG Focusing spot diameter: <0.01mm Marking area: 30mm/30mm-300mm/300mm optical Marking speed: > 800character/s Semiconductor life: > 500, 000 hour Marking depth: 0.01-0.2mm Operational system: Win98/Win2000/XP Cooling mode: Air cooling Controlling joint: Standard USB Accept typeface and document format: WINDOWS operating system fonts all typefaces/Font (including various countries language and writing/Bar code and so on); BMP/Belt 256 gradation images document and DXF/ and so on PCXPLT form vector graphic file Installation and training Qualified engineer will go to your company for installation and training free of charge. All expense related to this should be covered by buyer including air ticket, traffic in China, visa, lodging and board expense.Thank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.