20hz-5mhz Benchtop Digital Capacitance Resistance Impedance Continuously Adjust Inductance Bridge Lcr Meter
New Products From This Supplier
20Hz-5MHz Benchtop Digital Capacitance Resistance Impedance Continuously Adjust Accuracy guarantee
(1) in order to ensure the accurate measurement of the instrument, the heating time should be no less than 15 minutes.
(2) Do not frequent switching equipment, in order to avoid confusion caused by internal data.
(3) Correct open circuit and short circuit operation.
A new generation of high precision and high stability of boutique LCR meter,the 7 inch 800*480 TFT display screen, display classical and intuitionistic.
the series of equipment is highly applicable to the majority of manufacturers production inspection. and the series of equipment has a variety of output impedance model can be used for different manufacturers needs, its superior performance can be achieved business standards and military standards of a variety of tests (such as IEC and MIL).
| Model No. | 8100H | 8500H |
| Measurement Frequency | 20Hz-1MHz （0.01Hz Resolution) | 20Hz-5MHz （0.01Hz Resolution) |
| Basic measurement auracy | 0.05% | 0.05% |
| Equivalent circuit | Series, parallel | Series, parallel |
| Mathematical functions | Absolute value deviation, percentage deviation | Absolute value deviation, percentage deviation |
| Range way | Automatic, hold, manual selection | Automatic, hold, manual selection |
| Trigger mode | Automatic, manual, external, bus | Automatic, manual, external, bus |
| Measure (≥1KHz) | Fast: 200 times per second, medium: 12 times per second. Slow : 3 times per second | Fast: 200 times per second, medium: 12 times per second. Slow : 3 times per second |
| Average time | 1-255 | 1-255 |
| Delay time | 0-6s, Step by 1ms | 0-6s, Step by 1ms |
| Calibrating | Open/short circuit/load | Open/short circuit/load |
| Test configuration | Four/Five Ends | Four/Five Ends |
| Value List | 10 point list scanning function | 10 point list scanning function |
| Display mode | Direct reading , ▲%, V/I(Measured voltage/current monitoring) | Direct reading , ▲%, V/I(Measured voltage/current monitoring) |
| Display | 7in 800x480 color TFT LCD Display | 7in 800x480 color TFT LCD Display |
| Testing Signal | ||
| Output Impedance | 30Ω, 100Ω, 10/100, 10/Cc optional | 30Ω, 100Ω, 10/100, 10/Cc optional |
| DC offset source (interior) | -5V-+5V (-100mA--+100mA) , 5%, Step by 1mV | -5V-+5V (-100mA--+100mA) , 5%, Step by 1mV |
| Display Range | ||
| IZI,R,X | 0.01mΩ-99.9999MΩ | 0.01mΩ-99.9999MΩ |
| DCR | 0.001mΩ-99.9999MΩ | 0.001mΩ-99.9999MΩ |
| IYI,G,B | 0.00001μS-99.9999S | 0.00001μS-99.9999S |
| C | 0.00001μF-9.9999F | 0.00001μF-9.9999F |
| L | 0.00001μH-99.9999H | 0.00001μH-99.9999H |
| DCR | 0.00001-9.9999 | 0.00001-9.9999 |
| Q | 0.00001-9999.9 | 0.00001-9999.9 |
| DEG | -179.999--+179.999 | -179.999--+179.999 |
| RAD | -3.14159--+3.14159 | -3.14159--+3.14159 |
| Other | ||
| Comparator function | Class 10: (Nine qualified, one unqualified) and AUX | Class 10: (Nine qualified, one unqualified) and AUX |
| Multiparameter | Four parameters can be arbitrarily selected for simultaneous measurement and display | Four parameters can be arbitrarily selected for simultaneous measurement and display |
| Curve scanning function | Under multiple testing conditions, the graph scanning analysis of the tested part is carried out | Under multiple testing conditions, the graph scanning analysis of the tested part is carried out |
| Storage | Internal storage, USB extended storage | Internal storage, USB extended storage |
| Interface | Standard equipped with RS232C, HANDLER,USB HOST,USB DEVICE headphone interface, Pedal interface | Standard equipped with RS232C, HANDLER,USB HOST,USB DEVICE headphone interface, Pedal interface |
| Size | 340x265x100mm / 13.4x10.4x3.9in | 340x265x100mm / 13.4x10.4x3.9in |
Business Nature
Manufacturer
Country/Region
Dongguan, China
Main Products
Electric Instruments...
Different kinds of products are available in our company. We're pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
