320l Dry Cabinet For Precise Instrument Humidity And Temperature Control Storage Drying Cabinet
New Products From This Supplier
Product Introduction:
Mode: |
FCDE320 |
Humidity range |
1-10%RH |
Buy one and get eight service for free |
1. a three-year guaranteed 2.maximum and minimum tempratures alarm 3 .maximum and minimum humidity alarm 4.temperature correction 5. humidity correction 6.humidity control 7. anti-static 8. ground protection |
||
Outside dimensions (W*D*H): |
W900*D450*H1030mm |
Average power: |
15-60W |
inside dimensions (W*D*H): |
W898*D420*H848mm |
Control mode: |
automatic |
volume: |
320L |
Weight: |
60KG |
Power source: |
220V 50Hz/60Hz |
accuracy: |
±3%RH, ±1℃ |
Number of layer board: |
3 |
|
|
A. The main feathers of the product
◆ Display and accuracy: We take the advanced technology of highlight digital display ,and display the temperature and humidity separately. It can appear the working condition of the host computer. The digital display is accurate and long service life.The humidity setting has the memory function that don’t need to reset after outage.
Temperature display range: 0℃~99℃ accuracy: ±1℃
Humidity display range: 0%~99%RH accuracy: ±3%RH
◆Temprature and humidity sensor:Take the import temperature and humidity sensor (Sensirion) from Sweden.The error is less than ±2%RH.It is high precision and high stability.It also takes the design of special acquisition modul to avoiding danger,It is safe abd reliable.
◆Dehunidification system:Use imported polymer materials,dehumidity in normal temperature,memory alloy used for cooperating with microcomputer to control the system.The structural system can be separated.The host shell uses the ABS,it is so safety that can withstand high temperatures andinflaming retarding.
◆ Control mode:Full-automatic,run fully automatic with the microcomputer,without human supervision ,undrained.
◆ Product up-grade:Take the advanced modular design concept,easy to maintain ,in numerical module designed the extension interface on the host ,can upgrade the low humidity and middle humidity dry cabinet.
◆The desigin and material ou the cabinet:The cabinet made of high-quality steel plate,1.2mmthick.The structural design is high-strength and good at load-bearing,also has advantages of impervious and leakproofness.Under the cabinet with cheels and brake easy to move , swerve and fix.
◆The body of the cabinet use the laser cutting technology imported from Switzerland,with high manufacturing accuracy. It also adopts the technology of OTC and welding equipment from Panasonic,with good leakproofness and slippy.
◆Load layer board:The layers’ structural design is strengthended to enhance intensity and carrying capacity.The maximum load-bearing can up to 100kg.The gap between layers can be adjusted to meet your need.It is convenience to store and with high space use rate.
◆Door:The door window use the stalinte,3.2mm thick.The doorknob lock is plane pressure integration and have the abiliaty of anti-theft.
◆Spray-painted sueface of the cabinet: Using the import resin,painting on the full-automatic powder coating production line,the quality is good and nice-looking.
B.Dehumidifying principle:The main dehumidifier of electronic dry cabinet use high poiymer chemistry material environmental and hygroscopil.Take the memory alloy system to dehumification.With the unique pantented technology and intelligentized microcomputer control system,the equipment can run by itself ,the only you need to do is set the humidity you want.The main engine shell use the fire material withstand high temperatures for safe. The equipment can run replace with chemical dehumidification after outage.In 24 hours,the humidity rises less than 10% ,without getting damp,going hot ,leaking.Its energy conservation andlong service life.
Business Nature
Manufacturer
Country/Region
Changshu, China
Main Products
Dry Cabinet, Glove Box, Glove Box, Dry Cabinet...
Torun was founded in 2006. We develop in reseraching and developing Glove Box&Dry Cabinet.Nowadays, we have been the only one in the industy who equipped with vertical production line. We have more than 6000 square meters factory. Our team has nearly 20 years worldwide experience and more than 10 of our own product patents. We have ever completed more than 1500 custom cases.(Such as sampling device、filling system、packing isolation system、laser welding system and 3D printing system) These cases are succeed in using at the production base of companies around the world.The mian duty of us is to provide solutions of anhydrous and anaerobic process for the industries including new energy , pharmaceutical , chemical , nuclear power souece , OLED , laser welding and 3D printing. Today, our products have been exported to 28 countries, including but not limited to America, Germany, Russia, Indiam, Japen, Malaysia, Singapore, Korea. Better service will be provided in the future if you choose us.