Cold Room Sliding Door

TECHNICAL SPECIFICATIONS OF DOORS :

Room temperature range door to use         : NEGATIVE - 50C / POSITIVE 80 ° C
Door type                                                            : Slıdıng  door
Door Blade ( wing )Thickness                          : 80 mm
Door Blade ( wing ) sheet feature                  : Door sheet  are coatings with scratch protection surface with PVC films 100-200 µ micron / 0,50 mm x 0,70 mm (minimum) hot dipped galvanized coil coating painted steel
Door Blade (wing) sheet quality                     : dx51d + z - EN 10327 - Standards
Door Blade (wing) insulation features          : Polyol + Izocsiyanate = Polyurethane         Insulation density      : 40 - 45 kg / m3   - EN 1602 Standards                                              Thermal Conductivity Coefficient                   : λ = 0,022 W/mK   - EN 13162                    Fire Classification  : PUR - B-s1, d0 EN 13501-1/PIR  B-s1, d0 EN 13501-1 ( optionally )
Door Blade (wing) color suggested                 : Standard models Ral 9002 - Different colors optional PVDF (Polyvinylidene Floride) Painted Galvanized sheet
Door Insulation Gaskets  : Double Density Component with Epdm &PVC Combination Suitable for use in the thermal temperature range between 65 ° C & + 150 ° C As used in food and living areas, it’s in compliance with 21.CFR 177.2600 specifications & quality standards . the gasketed U polyamide support are used by us for the first time in the World , it’s ensured that the gaskets are 100 % fully pressed against the door sill.
Door Blade (wing) Case                                       : DIN 50049-2.2./EN 10204-3.1.B.  Anodized aluminum profile in Polyamide heat bridge according to the unit where the door is used or without bridges Frames first in the world It’s implemented by us . this system, even if there is a power failure in the doors where the heater is installed
100% it will be prevented door freezing.
Door Outer Handle    : There are 2 types of wings ( blade ) located on the outside of the door which provides a comfortable opening of the doors . According to the dimensions of the door & according to the customer requirements are applied either individually . The large opening lever is made of aluminum & stainless materials. 2. The holding drawbar PA 6.6 (Polyamide 6.6) is produced at 30% GF standards.
Door Inner Handle   : In dark rooms , In order to make the door opening handle easier & to facilitate the exit, the phosphor (shiny) marked PVC body has the inner handle with aluminum handle . Two arm application is made according to the door size.