Composite Condenser Bushing

Structure

FCRG Dry composite capacitive wall bushing is composed of the primary winding, housing, current carrier contactor, capacitor core, silicone rubber sheds, flange, and contactor clamps. The main insulation inside is divided into composite film capacitive insulation and rubber-impregnated fiber capacitive insulation. The main insulation outside is divided into high-temperature vulcanized composite rubber and porcelain. which can meet the needs of different users.

There is a measuring tap on the flange. When partial discharge and dielectric loss factors are measured, it is turned on and used. It should be reliably grounded during normal operation. The two ends of the product are the cable clamps.

Features

No gas, no oil

· Fire proof, explosion proof

· Maintenance-free

· Smaller volume, lighter weight

According to the standard

IEC 60137《Insulated bushing for alternating voltages above 1000V》

GB/ ANSI/AS/EN/DIN/ IEC/ IEEE/ GOST

Rated voltage：12~550kV

Rated current：100~5000A

Rated frequency：50Hz、60Hz

Ambient air temperature：-40~+50℃

Altitude：1000m（conferring with consumer if above 1000m）

Pollution class： Ⅱ、Ⅲ、Ⅳ

Installation: indoor-indoor, outdoor-indoor, outdoor-outdoor, horizontal or vertical installation.