Flanged Cast Iron Y-strainer / Pipe Filter

erformance features

1. High efficiency, precise filtration: the special structure of the filter disc filtration technology, precise and sensitive performance, to ensure that only particles smaller than the required particle size can enter the system, is the most effective filtration system; gauge The filter discs are available in 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ and so on, and users can choose different precision filter discs according to water requirements. The flow rate of the system can be flexibly adjusted according to the needs The flow rate of the system can be flexibly adjusted according to the needs.

The system is based on standard disc filtration units and is designed in a modular way, so that users can choose according to their needs. The system is compact and occupies very little space. The system can be flexibly installed in the corner space, e.g. a unit with a treatment capacity of 300 m3/h takes up only about 6 m2 (general water quality, filtration grade 100μ).

3. Fully automatic operation, continuous water discharge: between each unit in the filter combination, the backwashing process alternates in turn, and the working and backwashing states are automatically switched, ensuring continuous water discharge; backwashing consumes very little water, accounting for only a small amount of water. The water consumption of backwashing is very low, accounting for only 0.5% of the water output; if combined with air-assisted backwashing, the water consumption can be reduced to less than 0.2%. High speed and thorough backwashing can be completed in just tens of seconds

4. Long life: the new plastic filter element is strong, non-abrasive, non-corrosive, very little scaling, proven by years of industrial practice, no wear and tear even after 6 to 10 years of use, no aging, filtration and The filtering and backwashing effect will not deteriorate due to the use of time.

5. High quality, low maintenance: the products meet the corresponding quality standards, all products are tested and tested in simulated working conditions before leaving the factory, no special tools are needed, few parts; easy to use, only regular inspection is needed, almost no daily maintenance. The products are easy to use and require only regular inspection and almost no daily maintenance.