Jetcat P1000-pro

Jet-Cat P1000-PRO
This turbine engine is designed for industrial or professional use, and has a starter/generator that can supply his own electrical power and during operation it will charge his own battery.

This is the latest design of JetCat ,all items to operate this turbine is internal build in the front cover of the turbine , like the ECU , 3 Valve's for Fuel and Kero start ,2 x brushless fuel pumps, fuel filter.

Also the Barometric altitude and pressure sensor is build in with a bleed air connection with one way valve.

This turbine has a brushless Starter/Generator , which charge the battery as soon the turbine has his start sequence completed an is stabilized on his idle RPM

In flight restart is possible.

a 4 pole Molex expansion connection for Smoke or fuel pump.

Double ignition Kero start.

External possibility to switch on and start the turbine with a RC transmitter.

Emergency stop , to switch off the fuel pumps in case of emergency.

All engine data's will be stored like RPM , temp , fuel used

High quality ceramic bearings.

Voltage range :10-35 V DC for 3 S LiPo- Battery with XT60 connector for Lipo battery with a capacity of 3000 mAh or higher.

Battery type and number of Cells is to program in the software , during start the battery must be able to handel 300 Watts

This single shaft Turbine is equipped with a radial compressor ,diffusor , combustion chamber , turbine and Exhaust nose.

Pro will will say, digital controlled with all items internal of the turbine front cover.