Krd300\krd310 Series Of Rotary Inertia Measuring Table

System features:

★ pre-torsion can be driven by motor, with automatic deflection and release function, simple and convenient operation;

★ the motor pre-torsion and roll are designed to limit the mechanism, in place will automatically stop, to avoid misoperation may cause damage to the equipment, improve the operation safety;

★ moment of inertia measurement platform does not need leveling, can be directly installed on the ordinary ground, easy to use and move;

★High-speed response photoelectric sensor measurement system frequency, high measurement accuracy, good repeatability;

★ designed a special automatic calibration device (series of standard parts), the system can be calibrated online;

★ measuring range is related to the measurement accuracy. If the y measurement accuracy is 0.3, the measuring table can measure the ratio of maximum and minimum moment of inertia not more than 10 times; if the measurement accuracy is±0.05, the measuring table can measure the ratio of maximum and minimum moment of inertia not more than 20 times; measurement accuracy is 1, the ratio of maximum and minimum moment of inertia can be measured not more than 10 times;

★ in order to reduce the occupation of the site, radial moment of inertia measurement and axial moment of inertia measurement can be designed as a whole;

★ installation of a fixture, krd300 the measuring table can measure the inertia product and slender body inertia spindle angle;

★The air floating moment of inertia table can be used for the load below 500 kg. When the measuring accuracy is 0.1, the ratio of maximum and minimum moment of inertia can reach 20 times.

Measurement and control system:

●The measurement and control system includes industrial control computer (or commercial computer)，printer, measurement and control box，and the measurement and control system is installed in the same control cabinet to facilitate movement and operation。

●The system measurement software is divided into two independent parts-mass centroid measurement software and moment of inertia measurement software，which can be combined together.

●Under the windows operating system，the system measurement software is developed by labwindows development platform，which has the advantages of friendly interface, convenient operation and reliable system。