Pneumatic Vertical Shock Tester / Bump Testing Machine
New Products From This Supplier
KRD11 series pneumatic vertical shock/bump test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests.
- Pneumatic drive, simple structure and high reliability
- Pollution free, without hydraulic leak risk and keep the environment clean.
- Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times / min.
- It can easily realize large pulse width and small overload test.
- With a fast shock rate comparing to motor or hydraulic driven collision table, it has higher reliability and better collision waveform.
- The speed and rate of shock can be easily controlled by adjusting the gas pressure.
- IPS-2000 shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
- Built-in brake mechanism ensures the safety of operation in any situation.
Technical Specifications
|
Model Parameters |
KRD 11－5 |
KRD 11－15 |
KRD 11－25 |
KRD 11－50 |
KRD 11－100 |
KRD 11－200 |
KRD 11－400 |
KRD 11－600 |
KRD 11－800 |
KRD 11－1000 |
KRD 11－2000 |
||
|
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
2000 |
||
|
Table Size (mm) |
150×150 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1200 |
1500×1200 |
||
|
Peak Acc. (g) |
Half-Sine |
5-2.5k |
5-2k |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10～300 |
10～250 |
10～150 |
|
|
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 |
||||||||||
|
Trapezoid |
\ |
15-200 |
15-100 |
15-60 |
15-50 |
||||||||
|
Pulse Duration (ms) |
Half-Sine |
0.5～40 |
1～40 |
0.6～60 |
1.5～60 |
2～60 |
2.5～60 |
3～60 |
3.5～60 |
4～60 |
4.5～60 |
6～60 |
|
|
Post-Peak Sawtooth |
3～18 |
6～18 |
|||||||||||
|
Trapezoid |
\ |
3～18 |
6～18 |
||||||||||
|
Bump Waveform |
Half sine wave |
||||||||||||
|
Bump Peak Acceleration （g） |
4~150 |
5～100 |
|||||||||||
|
Bump Pulse Duration (ms) |
2~30 |
3~30 |
|||||||||||
|
Overall Dimension (mm) |
1000×1000 ×2100 |
1200×1000 ×2200 |
1400×1200 ×2300 |
1600×1400 ×2300 |
1700×1500 ×2300 |
1700×1500 ×2300 |
1900×1500 ×2450 |
1900×1500 ×2450 |
2000×1500 ×2450 |
1900×1800 ×2550 |
2200×1800 ×2550 |
||
|
Weight (kg) |
700 |
800 |
1000 |
1800 |
2500 |
2800 |
3800 |
4000 |
4800 |
5200 |
6000 |
||
|
Bump Rate (Times/Min) |
10~120 |
||||||||||||
|
Installation Condition |
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||||||
|
Power |
AC220V±10%, 50Hz |
||||||||||||
|
Air source |
≤0.8MPa |
||||||||||||
|
Floor |
No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment |
||||||||||||
|
Standards |
MIL-STD-810F IEC68-2-27 |
||||||||||||
|
Automation Grade |
Automatic |
|
Brand |
CME |
|
Display Type |
Analog |
|
Grade |
Automatic |
|
I deal in |
New Only |
|
Load Capacity |
2000kg |
|
Mode Type |
pneumatic |
|
Model |
KRD11 |
|
Packaging Type |
BOX |
|
Supply |
AC |
Business Nature
Manufacturer
Country/Region
Xianyang, China
Main Products
Test Machine...
CME Technology Co., Ltd. is located in Shaanxi National Development Zone, specializing in manufacturing equipment for mechanical testing and simulation, environmental reliability testing, non-standard testing, and capability of integrating planning, design, manufacturing, and installation and service as one. Tailor-made test solutions and non-standard test equipment for customers to help customers save resources and improve product reliability as much as possible.
