Solid Auto - Ignition Point Tester
New Products From This Supplier
This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.
Standards
It meets the requirements of GB/T 21756-2008 "Determination of Relative Autoignition Temperature of Solid Substances for Industrial Use", French National Standard NFT20-036-1985 "Determination of Relative Autoignition Temperature of Solid Solids for Industrial Use", and NY/T1860 "Experimental Guidelines for the Determination of Physicochemical Properties of Pesticides" Part 24: Relative Autoignition Temperature of Solids.
Technical Parameters
|
Working Environment |
(5～40)℃, <85%RH |
|
Test Objects |
Solid |
|
Temperature Control Range |
Room temperature～650℃ |
|
Standard Rise Rate |
0.5 ℃/min |
|
Customized Rise Rate |
(0.1～3.0)℃/min |
|
Temperature Measurement Range |
(0～800)℃ |
|
Temperature Measurement Resolution |
0.1 ℃ |
|
Temperature Measurement Accuracy |
±2.5 ℃ below 300 ℃ |
|
Heating Chamber Capacity |
±(0.75% of the reading) above 300 ℃ |
|
Timing Range |
2L |
|
Mesh Cage Size |
(0～96)h |
