Galvanized steel coils

RFQ Description

Inquiry#1 Cold Rolled Technique and SGCH,SGCC,DX51D,SGCD1-SGCD3 Steel Grade hot dipped galvanized Quantity Required: 600 Metric Ton/Metric Tons Time Left: 4D 22H Date Posted: 2016-01-30 (U.S. Pacific Standard Time) Posted in: Saudi Arabia Saudi Arabia (IP:188.51.157*) RFQ Details Report this RFQ Detailed Description Dear We are in market for following below Inq, Pls read Spec well. Kindly confirm that the steel mechanical properties complies with the following: - Bend ASTM E290 Testing available with the bend parallel and perpendicular to the rolling direction. (Requirements must be noted) - Hardness ASTM E18 Test includes three readings and an average as well as a conversion to a standard scale per ASTM E140. - Tensile ASTM E8 Test includes tensile, yield, and elongation percentage. - Surface Finish SAE J911 Test includes 10 random readings and an average per side. Sides must be designated for the final report and the sample must be relatively flat to be properly measured. - Grain Size ASTM E112 We can measure the ferritic grain size only. Readings are done using the optical comparison method. Measurement direction must be noted. - Inclusion Content ASTM E45 (Method A) Reading are done using the optical comparison method. Measurement direction must be noted. - Decarburization ASTM E1077/SAE J419 Readings are done optically. - Structure Readings are done optically Ferrous materials only at this time. The results will be whether or not the material is pearlitic, spheroidized with a percentage of spheroidization, or heat treated. - Chemistry ASTM E415 Chemistry is performed using optical emission spectroscopy (OES). Elements reported are Al, C, Mn, P, S, Si, Ni, Cr, Cu, and Mo. - Coercitivy ASTM A848 Measurement direction should be indicated Kindly confirm that the packing will be as bellows: 1. VCI Paper (Inner & outer) 2. Edge Protectors (Kraft Hardboard Paper) (Inner & Outer) 3. Pre-painted Metallic Cover Sheet (Inner) 4. EMetallic Edge Protectors (Inner & Outer) 5. Inner Diameter Metallic Ring 6. Eye Blank Metal (Side Cover) 7. Metal Seal and Plastic Pad 8. Metal Straps 9. Two Stickers (Inner & outer) 10. Pre-painted Metallic Cover Sheet (Outer) 11. Wooden Pallet for placing the coils.1. 1.2x1000: 100 Ton (CFR / Riyadh) thru Dammam port 2. 1.2x1219: 100 Ton (CFR / Riyadh) thru Dammam port3. 1.5x1000: 100 Ton (CFR / Riyadh) thru Dammam port4. 1.5x1219: 258 Ton (CFR / Riyadh) thru Dammam port5. 2.0x1219: 112 Ton (CFR / Riyadh)thru Dammam portBest Regards; Technique: Cold Rolled Surface Treatment: Galvanized Standard: AISI ; ASTM ; BS ; DIN ; GB ; JIS Inquiry#2 We are in market for AluZinc steel into coils. surface mini spangle. To JIS G3302- DC51D+AZ. Elongation A80 % - Max.500 - Min.22. • Coil I.D : 508mm. • Price term : CFR ABIDJAN, Ivory Coast (Ins2000) • Coil weight : Min 3 MT - Max 4 MT per package • Packing : Seaworthy, in container max 25 mton • Delivery allowance : +/- 10% in total. • Shipment : by containers, as soon as possible • Thicknesses : TCT Size ; 0.16mm x 914mm x Coil Qty 1000T Payment terms: confirmed LC sight thru 1st class bank only. Pls send us your best rock bottom price, Also advice your production schedule. Best Regards; Inquiry#3 Thickness: 2.85mm Windth: 4 ft Weight: 5-7 Ton Regular Rectangular zinc coating is 120 gm sq4 (508) Thickness: 3.85mm Windth: 4 ft Weight: 5-7 Ton Regular Rectangular zinc coating is 120 gm sq4 (508) Buyer Contact Information: Abdul Aziz Houri Saudi (Purchase Department) City Steel Co. Mobile: 00966-*******41 Phone: 00966 2 ******* China Mob: +86 - *******4494 *******@*****.com *******@*****.com *******@*****.com *******@*****.com