Procurement of Tents and Tarpaulin

RFQ Description

I am Mustapha Mai-Danladi with Musti Investment. Plastic Tarpaulin Sheet (4x5 m) - Made of woven high-density black polyethylene (HDPE) fibers, warp x weft, laminated on both sides with low density polyethylene (LDPE) coating, with reinforced rims by heat sealing on all sides, (or 2 sides heat sealing and 2 sides double stitching), and a 5 millimeters diameter PE or PP rope on the edge, inside the hem. 1000 denier minimum. Reinforcement eyelets: Aluminum eyelets or equivalent on four sheet sides of the single sheets at 100cm ±5cm center to center, providing very strong fixation points.Tensile strength: Minimum 600 N both directions of warp and weft (BS 2576, 50mm grab test or equivalent).Tear strength in plain sheet at state of origin Minimum 100 N both directions (BS 4303 wing tear or equivalent) or under ISO 4674 (A2).Tent, light weight, size 24 square meters, rectangular, frame type � Technical Specifications: Tent, 24m², light weight type. Size: 6 x 4.5m (+/-2%), Central height: 3.05m (+/-2%), Side walls height: 2.1 m (+/-2%), Fabric: Polyester 600 x 600 D, PVC coated, Weight per m²: 450g, Waterproof: 5.000mm, Fire resistant: CPAI 84, root proof and durable.Type of stitching: Full double stitching (two stitching lines) to sew the tent, roof seams are taped for complete waterproofingMud flaps: High tenacity polyethylene 200g/m²Frame galvanized steel, thickness 2mm, diameter 28mmThe main frame is composed of:n.15 tubes of 138cm length, n.26 tubes of 218cm length, n.4 tubes 50 cm length, n.28 joints of different sizes and form (as per the instruction sheet).I await your positive response.Regards,Mustapha Mai-Danladi