Looking For Debris chute construction refuse chute rubbish chute garbage chuterefuse collector

RFQ Description

Dear, Following is description for garbage chute for building BW-12b on project Belgrade Waterfront in Serbia. 7-B.2.3.14 Supply and install Garbage Chute inside concrete shaft, in accordance with standard BS 1703/NFPA82. Waste chute to be comprised of: stainless steel chute dia 600mm, minimal thickness 1.5mm; system must be water-tight. Intake sections coated with 2mm sound dampening fire resistant material are placed on each floor, 1200mm long with 600x400mm clear opening. Each intake to incorporate one fire sprinkler and one flushing sprinkler. Stainless steel intake door to be bottom hinged, noiseless, self sealing and self cloasing. At the base of the chute an automatic fire cut off coor shall be installaed. Discharge offset section min 3mm thickness; chute must have automatic cleaning system, sanitazing unit, ventilation, master controller (one door open at a time, complete system lock-out when the compactor is full, cleaning system to lock the doors during cleaning, heat/smoke sensors and alarm, interfaces with BMS).Heat and smoke detecting interlock system with temperature rise elements that locks chute doors when temperature in chute reaches a predetermined adjustable temperature. Heat and smoke detector should be provided. All according to specifications and drawings. Total length of chute is app. 63.43 m Measured per set. set 2.00 We need proposal for production and delivery of this system. If you can get back to me with confirmation that you will be sending proposal. Regards,