misc question and quote request for os16

RFQ Description

I read the FAQ and have a few questions and want a quote for the OS16Can you source a Kaeser or Atlas compressor for me when I order a OS16, so that I do not have to import from different locations? Which Kaeser or Atlas will fit the OS 16? Would the Kaeser SM9 work? It has .9 m3/min flow._.jpgWhat is the correct feed air requirement for the OS 16, and what size compressor is needed?Is the use of a desiccant dryer after a refrigerated dryer, helpful? I€™m talking about using a non-regenerating, single-tower, point of use, desiccant dryer which would be manually regenerated about once a month. Please answer given an ambient temperature of 20ºC and given an ambient temperature of 35ºC.Does this graph mean that the OS16 will have 30% more flow if installed in a climate controlled room with 20ºC, thus 110 lpm? €¦and will have 100% flow at 45ºC, thus 85 lpm? How is that possible? The Atlas Copco oxygen generator yields 100% capacity at 20ºC, and the Oxymat seems to yield 100% capacity at 30ºC. Is this Noxerior performance claim unique for the modular design?_ 8.40.09 PM.jpegAccording to this graph, Noxerior is most efficient if installed in a refrigerated container, with ambient temperature of 10ºC, though efficiency is not reduced by much if the ambient is 20ºC. But didn€™t the graph above just say that oxygen yield is 100% at ambient 45ºC?_ 1 8.40.09 PM.jpgWhen you say it comes with feed air filters, are you referring to pre, micro, and carbon filters?SchemaInstallazione_rev02os.jpegWhy does Noxerior put these 3 pre filters after the air receiver, instead of before it? I never saw a generator manufacturer do that. They usually put the filters before the air buffer tank?Is there not a dust filter after the carbon filter?Is there a reason why the oxygen buffer tank feeds back into the generator? is it because the flow totalizer is in the generator?Is there a difference between the Noxerior oxygen concentrator and generator?_.jpgWhat is the maximum oxygen output pressure that is possible? 6.2 bar? or more?Can I get a few hours of instruction from the factory, on how to do the periodic maintenance and how to integrate the generator with the compressor and product tank?Thank You, Mark DeRosa *******@*****.com