Looking for leather driving & riding gloves

RFQ Description

Philips,Good Morning.Please find the attached Spec for the Leather gloves do you supply these type of Leather rescue gloves. Qty – 8000 pairs1. Full Leather Rescue Gloves Construction Requirements:a.The material shall be constructed of Full Leather, but NOT Pig Skin. The leather shall be at least 1.2mm thick with a length not less than 23cm from the tip of the middle finger till the cuff. b.The outer leather shall be oil-tanned and treated for maximum weather resistance.c.The inner lining shall not peel or flake when subjected to sweat, dirt and other environment conditions.d.The lining shall be soft yet pliable, and will not cause abrasion to the wearer.e.There shall be a strap, inner liner or other methods to prevent debris from getting into the gloves while being worn. f.The glove shall preferably be washable and shrinkage shall not exceed 2%. g.Design: See attached picture, for reference only. Interested suppliers may propose alternative designs.h.Colour: Black or Dark Blue i.Construction: All major seams are double stitched for strength and will not cause abrasion or chafing to the wearer for long term usage.j.There shall be Anti-Slip patches on the palm side of the glove and on the finger tips in order to improve the grip of the gloves in both dry and wet weather conditions.k.The leather gloves shall be used for general purpose/ rescue operations.l.The leather gloves shall provide maximum hand protection during rescue operations.m.The gloves shall be used on its own or with a liner, yet maintaining maximum dexterity.n.The gloves, in new and unused condition, shall not show signs of cracking or peeling when stored in normal storage environment for at least 12 months.Please send me your email conyact i will send you actual photo of gloves. For further assistance please free to contact.Thank you.Best Regards,Dennis PoshanSales EngineerEmail: *@********************5 9671 5464