loading arms

RFQ Description

Dear Sir, Please quote price for following loading arm: Loading arm 4 dia complete setQTY: 08 NOS. OPERATING CONDITIONS: Fluids: Refined liquid petroleum products such as Gasoline, Diesel, Furnace Oil, JP-1, JP-4 Kerosene etc.Service Temperature: -5 to 50 degree CelsiusWorking pressure: Maximum 5 BARFlow Rate: 2250 Ltr /min LOADING ARM SPECIFICATIONS: TYPE: Top Loading Arm, Balanced with Torsion Spring, Right hand configurationDiameter of loading arm: 4 (dn 100mm)Inlet Flange: 4 ANSI 150 lbs. raised face (upright inlet), flat face also acceptable.Inlet swivel: consisting of one vertical and one horizontal plane of rotation.Onto this swivel the torsion spring balance will be mounted.Intermediate Swivel: consisting of one horizontal plane of rotation.Drop tube Swivel: consisting of one vertical plane of rotation.Loading Valve: Hold Open Cam type with extension control (which allows the operator to open and close the valve while standing on the tank truck.)DIMENSIONS:Primary Arm Length: 2800 mmSecondary Arm Length: 850 mmDrop Tube: 1600 mm with end 45 degree beveled MATERIAL:Supplier to specify (must be compatible with service fluids asspecified above), preferably Aluminum.Seal Material: Supplier to specify, must be compatible with servicefluids as specified above). TESTING/ INSPECTION:a) Performance Test: Torsion spring balance adjustment to achieve perfect movements and checking of all planes of rotation for proper functioning.b) Hydrostatic Test: Testing up-to 1.5 times working pressure is required.c) Material certificates: Material Certificates according to EN10204-2.2 are required for all pressure containing parts.DOCUMENTATION:Within 10 Days after the receipt of P.O, contractor will send us a drawing for approval.At the time of delivery, supplier will provide following documents:- One set Test Certificate of performance and hydrostatic test.- Two sets As-Built Drawings.- One Set EN 10204-2.2 material certificate.- One set General Installation & maintenance Instructions DELIVERY PERIOD:16 weeks after issuance of purchase order/ LOI. Pervez BashirMatrix Automation & Control11-C, 32nd Street, Tauheed Commercial,Phase-5, DHA, Karachi- PakistanTel: +92-21-*******3Fax: +92-21-*******9Cell: +92-300-*******