misc question and quote request for os16

RFQ Description

I read the FAQ and have a few questions and want a quote for the OS16Can you source a Kaeser or Atlas compressor for me when I order a OS16, so that I do not have to import from different locations? Which Kaeser or Atlas will fit the OS 16? Would the Kaeser SM9 work? It has .9 m3/min flow.____________________________.jpgWhat is the correct feed air requirement for the OS 16, and what size compressor is needed?Is the use of a desiccant dryer after a refrigerated dryer, helpful? Im talking about using a non-regenerating, single-tower, point of use, desiccant dryer which would be manually regenerated about once a month. Please answer given an ambient temperature of 20ºC and given an ambient temperature of 35ºC.Does this graph mean that the OS16 will have 30% more flow if installed in a climate controlled room with 20ºC, thus 110 lpm? ¦and will have 100% flow at 45ºC, thus 85 lpm? How is that possible? The Atlas Copco oxygen generator yields 100% capacity at 20ºC, and the Oxymat seems to yield 100% capacity at 30ºC. Is this Noxerior performance claim unique for the modular design?____________________________ 8.40.09 PM.jpegAccording to this graph, Noxerior is most efficient if installed in a refrigerated container, with ambient temperature of 10ºC, though efficiency is not reduced by much if the ambient is 20ºC. But didnt the graph above just say that oxygen yield is 100% at ambient 45ºC?____________________________ 1 8.40.09 PM.jpgWhen you say it comes with feed air filters, are you referring to pre, micro, and carbon filters?SchemaInstallazione_rev02os.jpegWhy does Noxerior put these 3 pre filters after the air receiver, instead of before it? I never saw a generator manufacturer do that. They usually put the filters before the air buffer tank?Is there not a dust filter after the carbon filter?Is there a reason why the oxygen buffer tank feeds back into the generator? is it because the flow totalizer is in the generator?Is there a difference between the Noxerior oxygen concentrator and generator?____________________________.jpgWhat is the maximum oxygen output pressure that is possible? 6.2 bar? or more?Can I get a few hours of instruction from the factory, on how to do the periodic maintenance and how to integrate the generator with the compressor and product tank?Thank You, Mark DeRosa *******@*****.com