granules

RFQ Description

Dear Sirs,We are interested in buying the following products:1.Low density polyethylene (LDPE), GOST 16337-77 15303-003 premiumDensity: 0,9205 ± 0,0015 g/cm3.Melt Flow Rate: 0,3 ± 30% g/10 min.Spread of melt within the party: no more than ± 6%.The number of inclusions: no more than 2 units.Tensile strength: not less than 9.8 MPa.Tensile strength: not less than 13.7 MPa.Elongation at break: not less than 600%.Mass fraction of extractables: no more than 0.4%.Resistance to cracking: at least 500 hours Quantity 5-20 tones2.Linear low density polyethylene (LLDPE) F-0120Density: 0.9180 - 0.9220 g/cm3.Melt Flow Rate: 0.70 - 1.50 g/10 min.Coefficient of voltage: 1.30 - 1.38.Longitudinal tensile strength: not less than 9.0 MPa.Tensile shear: not less than 10.0 MPa.Longitudinal tensile strength: not less than 25.0 MPa.Transverse tensile strength: not less than 28.0 MPa.Elongation at break longitudinal: not less than 650%.Elongation at break of the cross: not less than 800%.The point of mitigation: 84 °C.Strength piercing: 140 g / mil.Longitudinal tear strength: 130 g/m2.Transverse tear strength: 340 g/m2.Quantity 5-20 tones 3.High-density polyethylene (HDPE) B-Y460Density: 0,958-0,962 g / cm 3 .Melt Flow Rate: 0,33-0,46 g/10 min.Coefficient of voltage: 1,75-1,85.Tensile strength: not less than 30.0 MPa.Elongation: not less than 1,000%.Hardness by Shore: 69.The point of mitigation: 127 °C.Oven aging: 50 hours.Modulus of elasticity: 1345 MPa.Izod impact strength: 70 Joule / m2Quantity 5-20 tones4.High-density polyethylene (HDPE) B-Y456Density: 0,954-0,957 г/Ñм3.Melt Flow Rate: 0,33-0,46 g/10 min.Coefficient of voltage: 1,86-1,96.Tensile strength: not less than 30.0 MPa.Elongation: not less than 860%.Hardness by Shore: 67.The point of mitigation: 125 °C.Oven aging: 100 hours.Modulus of elasticity: 1170 MPa.Izod impact strength: 80 Joule / m2Quantity 5-20 tonesWe are waiting your offer and prices. With best Dmitriy Mitkin