Platinum wire 0.015mm diameter

RFQ Description

Alloy - should be a high percentage of platinum. Platinum-rhodium alloys are ok (87/13). As is platinum-nickel 90/10.Dimensions - We are going to want the cross-sectional area of the wire to be a little bit less if we are going to use a circular wire rather than a flattened ribbon. Were not sure the exact dimensions but we suggest something around 50-75% or the cross-sectional area as our current ribbon. The ribbon is 1500 um^2, so shoot for 0.015 mm diameter wire. Dear Sales Rep, This email was sent by one of our design engineers. We have ribbon (pure platinum) and it works well, until it becomes kinked or bent. We are looking for possibly purchasing circular wire. If you could, we would like to sample a piece, possibly an inch or two would work. This can be platinum, platinum-rhodium, or platinum-nickel. If there is an issue please let me know. We are in the need of the wire ASAP. If the circular sample works well we would like to get away from the ribbon permanently and purchase circular immediately. We are open to other suggestions of alloys, as long as it is flexible and durable. Kind DaNell PalinkasUltraBalance Product Specialist ***** platinum, alloys, precious metals Platinum wire