RFQ Description
SEAMLESS CARBON STEEL PIPES CONFORMING TO API5L Gr.BASTM A106 Gr.BASTM A53 Gr.B, DIMENSIONS ACCORDING TO ANSIASME B36.1, IN 6M STD. LENGTHS. IN THE FOLLOWING SIZES AND QUANTITIES:& CAST STEEL BALL VALVEASTM A216 GR WCB, 150# RF FLANGED ENDS, REDUCED BORE, 13% Cr. TRIM, ELECTRONICKLE PLATED BALL, OPERATOR: GEAR (FOR SIZES 8? & ABOVE) HANDWHEEL & CAST STEEL GATE VALVE: ASTM A216 GR WCB, 150#, RF FLANGED ENDS, SOLID WEDGE, BOLTED BONNET, RISING STEM, GEAR OPERATED FOR SIZES 8? & ABOVE AND HANDWHEEL & FORGED STEEL GATE VALVE:GATE VALVES 800#, THREADED ENDS, SOLID WEDGE, BOLTED BONNET, AS PER API 602.BODY : ASTM A105,SEAT : HARD FACE 13% Cr.& CAST STEEL CHECK VALVES:CHECK VALVE 150#, R.F FLANGED ENDS, SWING TYPE AS PER ANSI B16.34 ,BOLTED BONNET,BODY: ASTM A216Gr.WCB,DISK: ASTM A216, WCB,& BUTT WELDING 90O ELBOWSELBOW 90Ã�ÀšÂº, LONG RADIUS, B.W. ENDS, ASTM A234, GR.WPB AS PER ANSIASME B 16.9.& BUTT WELDING 45O ELBOWSELBOW 45Ã�ÀšÂº, LONG RADIUS, B.W. ENDS, ASTM A234, GR.WPB AS PER ANSI B 16.9 & SLIPON FLANGESFLANGES SLIPON TYPE, 150#, RAISED FACE, ASTM A105, AS PER ANSI B16.5. & BLIND FLANGESBLIND FLANGES 150#, RAISED FACE, ASTM A105, AS PER ANSI B16.5. & EQUAL TEESTEE, B.W ENDS, ASTM A234 GR. WPB AS PER ANSI B16.9. & REDUCING TEESREDUCING TEE, B.W ENDS, ASTM A234 GR. WPB AS PER ANSI B16.9. IN THE FOLLOWING SIZES AND QUANTITIESGASKETSSUPPLY AND INSTALLATION OF 3 mm THICK, KLINGERITE OR EQV. FLAT RING GASKETS, FOR 150 LBS RAISED FACE TYPE FLANGES, CONFORMING TO ANSI B 16.21, STUD BOLTS & NUTS STUD BOLTS WITH TWO HEXAGONAL NUTS & TWO WASHERS EACH,MATERIALS ARE AS FOLLOWS:STUD BOLTS: ASTM A193 GR. B7 CADMIUM PLATED.HEX. NUTS: ASTM A194 GR. 2H HEAVY HEX CADMIUM PLATED.PIPE NIPPLESASTM A106, Gr.B ASTM A53 Gr.B
