Get Quick Quote From Supplier
Please check below material and let me know whether you can deal with. Material should be exact as mentioned in the specification since tolerance cannot accept. This material we need it on regular basis on every month for steel drum manufacturing. Specification: Equivalent to JIS G 3141, SPCC-SD, DOS-A Oiled, Slit edge, tension leveled. Continuous cast and annealed with no laminations, pinholes or inclusions. No variation acceptable in width wise. Width Tolerance -0/+3mm DOS oiled min 80-120 mg /m2/side Hardness HRB 45-60 Internal Coil ID 508mm Thickness tolerance +0/-JIS Weighing Actual Weight, net for net Packing Mills standard export packing Coil weight Acceptable weight minimum 7.0 ton to maximum 8 ton per coil. Material Dimension Coil Weight Quantity CR Coil 0.8 mm X 1310 mm Min 7 Max.8 50 tons CR Coil 0.8 mm X 915 mm Min 7 Max.8 100 tons CR Coil 0.9 mm X 1310 mm Min 7 Max.8 100 tons CR Coil 0.9 mm X 915 mm Min 7 Max.8 200 tons CR Coil 1 mm X 1310 mm Min 7 Max.8 50 tons CR Coil 1 mm X 915 mm Min 7 Max.8 100 tons Total : 600 tons