Get Quick Quote From Supplier
ITEM 1: GAS SAMPLING FLASKSThe flasks are for collecting gas samples from geothermal wellsTo be made of borosilicate glassTo withstand temperatures of up to 300 deg C To withstand pressures of up to 10 bars (g)To have two (2) open ends fitted with air-tight screw-able teflon stopcocks. Volume: 300- 400 mlThe flasks shall be subjected to physical testing under the above conditions before delivery is accepted.Manufacturers Authorization Must be provided. Brochure and operation manual Must be provided.ITEM 2:TITROPROCESSOR-Measuring range-pH value pH 0.00 to 14.00-Voltage U-2000.|+2000 Mv-Temperature Temp -20 to + 200Should come complete with-two dosimats-Three exchange units of various sizes i.e.10 ML, 50 ML, and 100 ML-Thermal printer-Voltage 240 volts-Frequency 50 HzITEM 3: THERMOCOUPLESThe equipment is used for measuring temperatures of geothermal fluids during geothermal explorations. : With Calibration certificate, temperature range 0-300 deg C. Penetration probe and general purpose probe;Penetration Probeequal or more than 90 cm . :Carrying case, spare batteries :General purpose probe 0-100 deg CITEM 4: STANDARD TESTING SIEVES FOR SOIL PARTICLE DISTRIBUTION TESTSThis equipment is used for carrying out particle size testing of different materials e.g. soils distribution. :Should have individual serial numbers for traceability :Should come in 3, 4, 5, 6, 8, 10 and 12 sizes. :Should rigid rolled edges and extended bottom skirts to ensure good fit between frames, pans and separators and same diameter :Should have sieve number, micron size, and nominal opening in millimeters and inchesITEM 5: PORTABLE DIFFUSE FLUX METER. CARBON DIOXIDE, METHANE AND HYDROGEN SULFIDE.With the following specifications:A West systems Flux meters:Backpack-like support vest:Carrying case for transport and storage:2 batteries NiMH 14.4 Volts 4.5A/h and 1NiMH battery charger. measuring, test, and analysis, equipments test and reseach equipments