Get Quick Quote From Supplier
This is a wireless A/V setup which can be attached to radio controlled airplanes for realistic flight experience using video goggles.From one retailers website:12 Channel 900Mhz Tx/Rx video system with CCD camera. Great for FPV systems in countries with less restrictive RF power output.Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.If you buy your camera and Tx seperately the plug polarity and voltages may be very different. Included.1 x branded CCD 1/3inch Camera1 x 900Mhz 4 channel Video Transmitter (200mW)1 x 900Mhz 12 channel Video Receiver Camera spec.CCD sensor type:1/3 color branded CCD Pixel;NTSC: 510(H)*492(V) (included) PAL: 500(H)*582(V)Scanning system: Interlaced scanningSynchronization: System:InterHorizontal resolution: 420TV line Minimum Illumination 0.01LUX/F1.2DSP+CCD: CXD3142R+405AKS/N Ratio: 48dB Gamma Modification: 0.45 White balance: AutoAuto backlight compensation: AutoLens: 3.6MMAudio: NoInput voltage: 9~12.6VElectric current 80MAElectronic Shutter: 1/50 (60) ~ 1/100, 000s Video output: 1.0VP-P composite video Operation Temp.: -20~50Size: 38*38mmFlight time: Approx 60min/100mah 3S FPV Tx Spec.Channel: 4-Ch, AV synchronizationPower: 200mWInput voltage: 12VWeight: 18gSize: 31x88x8mmFrequency: 0.9G 0.910G, 0.980G, 1.010G, 1.040G rc airplanes, wireless a/v, electronics Wireless transmitters and receivers, RC model airplanes, 1/3 CCD cameras