RFQ Description
1RIG-CHA-00028 DRG-ROPE, WIRE, 1-3/4-IN, EIP, L-LAY, 250-FT. Old S/N 760-10901Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, LEFT LANG LAY, LUBRICATED, 6 X 36, FILLER WIRE-SEAL.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 1-3/4 INCH DIA., *** LBS. MINIMUM BREAKING STRENGTH, 5.66 LBS/FT APPROXIMATED WEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, THE CORE SHALLBE 6 X 7 WITH WIRE STRAND CORE.250.0-FEET LENGTH, THE WIRE ROPE SHALL BE CUT TO EXACTLENGTH AND EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT.IT SHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORT FOR THE WIRE ROPE WITH THE SHIPMENT AND A COPY TO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT/FOR ACP USERS: STERN SPUD. DREDGE CHRISTENSEN//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN SEPTEMBER 2008/2RIG-CHA-00031 DRG-ROPE, WIRE, 2-3/8-IN, EIP, L-LAY, 276-FT. Old S/N 760-11221Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, LEFT LANG LAY, LUBRICATED, 6 X 36, SEALE-WARRINGTON-SEAL.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 2-3/8 (-0, +5%) INCH DIA., 548, 000 LBS. MINIMUM BREAKING STRENGTH, 10.42 LBS/FT APPROXIMATED WEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, THE CORE SHALLBE 6 X 7 WITH WIRE STRAND CORE.INDIVIDUAL WIRES SHALL MEET TORSION AND TENSIONREQUIREMENTS IN ACCORDANCE WITH ASTM A 1007-07 FOR EIP STEEL, 276.0-FEET LENGTH, THE WIRE ROPE SHALL BE CUT TO EXACT LENGTH AND EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL.PRE-FORMING SHALL BE SUCH THAT A MAXIMUM STRAND HELIX HEIGHT TO ACTUAL ROPE DIA. IS 90%./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLESHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN SEPTEMBER 2008/3RIG-CHA-00032 DRG-ROPE, WIRE, 2-3/8-IN, EIP, L-LAY, 387-FT. Old S/N 760-***Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, LEFT LANG LAY, LUBRICATED, 6 X 36, SEALE-WARRINGTON-SEAL.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 2-3/8 (-0, +5%) INCH DIA., 548, 000 LBS. MINIMUM BREAKING STRENGTH, 10.42 LBS/FT APPROXIMATED WEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, THE CORE SHALLBE 6 X 7 WITH WIRE STRAND CORE.INDIVIDUAL WIRES SHALL MEET TORSION AND TENSIONREQUIREMENTS IN ACCORDANCE WITH ASTM A 1007-07 FOR EIP STEEL, 387.0-FEET LENGTH, THE WIRE ROPE SHALL BE CUT TO EXACT LENGTH AND EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL.PRE-FORMING SHALL BE SUCH THAT A MAXIMUM STRAND HELIX HEIGHT TO ACTUAL ROPE DIA. IS 90%./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLESHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN SEPTEMBER 2008/4RIG-CHA-00033 DRG-ROPE, WIRE, 2-3/8-IN, EIP, L-LAY, 443-FT. Old S/N 760-11342Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, LEFT LANG LAY, LUBRICATED, 6 X 36, SEALE-WARRINGTON-SEAL.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 2-3/8 (-0, +5%) INCH DIA., 548, 000 LBS. MINIMUM BREAKING STRENGTH, 10.42 LBS/FT APPROXIMATED WEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, THE CORE SHALLBE 6 X 7 WITH WIRE STRAND CORE.INDIVIDUAL WIRES SHALL MEET TORSION AND TENSIONREQUIREMENTS IN ACCORDANCE WITH ASTM A 1007-07 FOREIP STEEL, 443.0-FEET LENGTH, THE WIRE ROPE SHALL BE CUT TO EXACT LENGTH AND EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL.PRE-FORMING SHALL BE SUCH THAT A MAXIMUM STRAND HELIX HEIGHT TO ACTUAL ROPE DIA. IS 90%./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLESHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN SEPTEMBER 2008/5RIG-CHA-00036 DRG-ROPE, WIRE, 2-3/8-IN, EIP, R-LAY, 276-FT. Old S/N 760-11521Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, RIGHT LANG LAY, LUBRICATED, 6 X 36, SEALE-WARRINGTON-SEAL.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/1023M-07.IT SHALL BE 2-3/8 (-0, +5%) INCH DIA., *** LBS. MINIMUM BREAKING STRENGTH, 10.42 LBS/FT APPROXIMATED WEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, THE CORE SHALLBE 6 X 7 WITH WIRE STRAND CORE.INDIVIDUAL WIRES SHALL MEET TORSION AND TENSIONREQUIREMENTS IN ACCORDANCE WITH ASTM A 1007-07 FOR EIP STEEL, 276.0-FEET LENGTH, THE WIRE ROPE SHALL BE CUT TO EXACTLENGTH AND EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL.PRE-FORMING SHALL BE SUCH THAT A MAXIMUM STRAND HELIX HEIGHT TO ACTUAL ROPE DIA. IS 90%./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLESHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN SEPTEMBER 2008/6RIG-CHA-00073 DRG-ROPE, WIRE, 1/1/2-IN, 6 X 37, EIPS, UNCOATED, 1650 FT. Old S/N 760-47209Rel ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, RIGHT REGULAR LAY, 6 X 36, SEALE-FILLER WIRE.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 1-1/2-INCH DIA., *** LBS. MINIMUMBREAKING STRENGTH, 4.16 LBS/FT APPROXIMATEDWEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, 1, 650-FEET LENGTH, EACH LENGTH ON A SEPARATEDSUBSTANTIAL REEL, SHALL BE TREATED WITH RUST PREVENTIVE LUBE./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIREROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLESHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TOHAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATUREAND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY FAAL-QAS IN MARCH 2009/7RIG-CHA-00078 INV-ROPE, WIRE, 5/8-IN, 6 X 19, EIP, UNCOATED, IWRC. Old S/N 760-***00Ft ROPE, WIRE, EXTRA IMPROVED PLOW STEEL, UNCOATED, PREFORMED, RIGHT REGULAR LAY, CLASSIFICATION 6 X 19, WARRINGTON-SEALE, WIRE ROPE SHALL BE 6 X 26 (1-5-(5+5)-10).IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 5/8-INCH DIA., 41200 LBS. MINIMUMBREAKING STRENGTH, 0.72 LBS/FT. APPROXIMATEDWEIGHT, INDEPENDENT WIRE ROPE CORE /IWRC/, INDIVIDUAL WIRES SHALL MEET TORSION AND TENSIONREQUIREMENTS IN ACCORDANCE WITH ASTM A 1007 FOR EIP STEEL, 1, 000-FEET LENGTH, EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIRE ROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLE SHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TO HAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATURE AND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN FEBRUARY 2009/8RIG-CHA-00066 INV-ROPE, WIRE, 3/8-IN, 6 X 37, IPS, UNCOATED, FIBER CORE. Old S/N 760-***00Ft ROPE, WIRE, IMPROVED PLOW STEEL, UNCOATED, PREFORMED, RIGHT REGULAR LAY, 6 X 37, FILLER WIRE.IT SHALL BE IN ACCORDANCE WITH ASTM A 1023/A 1023M-07.IT SHALL BE 3/8-INCH DIA., 12200 LBS. MINIMUMBREAKING STRENGTH, 0.24 LBS/FT. APPROXIMATEDWEIGHT, FIBER CORE, 1, 000-FEET LENGTH, EACH LENGTH ON A SEPARATED SUBSTANTIAL REEL./A 12-IN. SAMPLE OF ANY FABRICATION BATCH OF THE WIRE ROPE SHALL BE INCLUDED WITH THE SHIPMENT. THE SAMPLE SHALL BE CUT OFF BY A MECHANICAL MEAN IN ORDER TO HAVE A CLEAR SECTION OF THE CABLE SAMPLE//MANUFACTURER SHALL FURNISH A MILL TEST REPORTFOR THE WIRE ROPE WITH THE SHIPMENT AND A COPYTO THE CONTRACTING OFFICER ADDRESS.ACP ORDER NUMBER, STOCK NUMBER, AUTHORIZED SIGNATURE AND THE PERSONS NAME SHALL APPEAR ON THE DOCUMENT//DESCRIPTION REVISED BY RHSH AND FAAL-QAS IN FEBRUARY 2009/ marine, rope, certified public bid seller
