Get Quick Quote From Supplier
General Specifications:(1) A hollow shaft(Shaft dia.outer approx. 20mm, dia.inner 10mm).One end of the shaft is threaded on the outside and inside it has a Morse #1 taper. The other end has a simple securing point(Hole). (2) Power 1000W-1500W (3) 8 Poles BLDC(4) Steady speed/torque ie: minimum/no cogging.Speed steady torque the range 250(?) to 3500rpm(5) Max speed approx. 4000-4500rpm Rated speed 3000rpm(6) Constant Torque approx. 1.5 -2.25N-m (7) Max length of motor body(Excluding shaft projections) = 110mm / 120mm(8) Max length of motor body(INCLUDING shaft projections) = 150mm / 160mm(9) Max width 65mm(10) Weight 4kg or less.(11) Power from a controller to which the input is 220/250V AC single phase 20Amps. (12) Feedback from windings and rotor(current,temperature and position(HallSensors) for speed and direction.(13) Operating conditions: -10degC to 40degC, dust and vapour, ambient air cooling.(14) Conforms to normal European standards.(15) Controller(s) for above.(16) Delivery to SwitzerlandIf it is possible to supply a motor that conforms to items 1 to 10, and especially items 1 to 6,and the cost is is reasonable I would order one unit with its controller etc.If the motor performs as expected then I would place an order for three more along with one, and posssibly two, controllers.