Get Quick Quote From Supplier
How are you,Sir we want X ray baggage scanner for our client based in PUNE (INDIA)1)Scope of Work:Supply installation and maintenance of X-Ray Baggage Scanner for our client•Authorization letter from the manufacturerAnnexure-ITechnical specifications for X-Ray Baggage Inspection System1.0SYSTEM DESCRIPTION – The machine should be capable of scanning Laptop Bags, Tiffin carrier, tool kits, Visitor bags and very flat objects such as envelopes. 1.1 Tunnel Dimensions - Tunnel should be capable of scanning the baggage size of not less than 600 mm x 400 mm. 1.2 Penetration – The Penetration shall not be less than 37 mm steel plate1.3 Sensitivity – The machine should be able to display a single insulated copper wire of 38 Gauge Wire. The wire gauge measured in American Wire Gauge.1.4 Health & Safety - Machine should be International standards including the U.S.F.D.A., Center for Devices and Radiation Health performance standards for cabinet X-Ray systems.1.5 X-Ray Dose – The radiation level should not exceed accepted health standard i.e., within 0.1 mR / hr at a distance of 5 cm from external housing. 1.6 X-Ray Beam Divergence – The X-ray beam divergence should be such that the complete image of maximum size of bag is displayed without corner cuts.1.7 X-Ray Inspection – Facility for variable contrast should be incorporated to allow enhancement of lighter and darken portion of the image. System should have facility of variable Gamma, organic & inorganic stripping, baggage counter.1.8 Lead Impregnated Safety Screens – Lead impregnated safety screens should be available at either ends of the tunnel.1.9 Color Imaging – The system supplied shall be of equal or preferable more than 6 Colors & 1 Grayscale Color Image options. 1.10 Conveyor Height – The Conveyor height shall be in the range of 700-730 mm.1.11 Conveyor belt Speed – Conveyor speed shall be at least 0.23 m/s in forward direction.1.12 Conveyor Load – Minimum 150 Kg distributed load1.14 Operating Temperature & Humidity – The operating temperature should be 0ºC to 50 ºCHumidity - Up to 95% non-condensing1.15 Power Requirements & Power Conditioning – Power Requirements shall be 220VAC: 183-253 VAC, 50 Hz. 10 Amp MaxPower Conditioning -i)Suitable UPS for 15 minutes back up of reputed make should be provided.1.16 Bi-directional Scanning – Bi-directional scanning facility should be provided without holding any switch.1.17 Certification – The quoted system shall have the following approvals – 1)AERB 2)CE3)CB4)ISO 90015)3rd Party Electrical Safety Certifications1.18 Operational Safety – Emergency stop switch at both the ends of tunnel should be provided1.19 User Manual – Two sets of operator manual should be provided