Get Quick Quote From Supplier
Techenical Specification For Lab Water Station1).Lab water Station produce WFI meets the internatinal standerds and according to current GMP ruquirements and FDA. 2) WFI Flow rate not less 250 lt/h3).WFI Conductivity 0.5 MS/cm. 4) Free pyrogen tests. 5)perform automatic.salf sanitication.6)Power supply 380v,3ph, 50Hz. Or 220v (1pH).7)Lab water station included with all units to obtain WFI according to GMP, softwaer. 8)all filter carbon-sand-R.0 pump and ACC-disfiller.9)Raw water will be supplied from cty water network. 10)The produced WFI supplied to the user points at 25c.11)The available area for the station is 3x2 meter lunghit x wrdth. 12)Provides with effective against bacteria and Endotoxin.13)Sampling check points & full validation system.14)measuring & controlling techniqune on line for the following:-Conductivity-Temperture-PH-Pressure-flow rate-alarms....etc.. all pipes and joins from St.St. 316L and Tankd also St.St 316L or porypline.. IQ,OQ and operation and maintenance. Cataloge and spare parts list.. all tests cost must be done by ferderGuarantee period one year including free maintenase.. Installation start up and training site..