NiCad Battery and Battery Charger

RFQ Description

NiCad Battery: (08 Sets)high performance Nickel Cadmium pocket plate type complying with IEC 60623 and shall be designed for a life expectancy of 25 years. Each Battery set shall contain 90 nos. of battery cell. Battery Type and Model : Pocket plate Nickel Cadmium Alkaline.Operating Voltage: 110 V, DCNo. of cell in each set: 90Charging voltage (normal): 1.3-1.5 volt per cellCharging voltage (max): 1.75 volts per cellType of container: High impact translucent plastic or annealed glassConstruction: Closed topBattery Charger : (05 Sets)The charger shall automatically adjust the charging current from a value not less than the battery capacity divided by 10 hours to a minimum value of not more than the battery capacity divided by 200 hours. The charging circuitry shall be so designed that the failure of any component will not give a situation which will cause permanent damage to the battery by over charging. Rectifier type: SiliconRated load voltage: 110 V D.CInput voltage: 400 V (50 Hz) three phases or 230 V single phaseCharging operating control: Boost and floating charge, automatic with manual operationOutput voltage variation with input voltage & frequency: +3% to -2% (V)Boost charging voltage per cell: 1.6 to 1.75 (V)Boost charging time: 6 to 8 (Hours) 8 sets (8x90) nicad battery and 5 sets battery charger Shadow Less Single Reflector O.T.Light