Accordion Style Musical Cable Holder

RFQ Description

REQUEST FOR QUOTATIONRFQ# 0002: ACCORDION STYLE CABLE HOLDERREQUEST DUE: March 14, 2014AWARD DATE: March 28th, 2014 FINAL PRODUCT AVAILABLE: May 5th, 2014POINT OF CONTACT: Daniel M. SmelterRequesting quotation for the development and construction of an accordion style storage apparatus. The quotation is requested for the following number of units: 1001, 00010, 000 The costs shall be broken-down to: per unit cost, NRE and shipping to Chicago, Illinois, Unites States of America. PRODUCT DESCRIPTIONThe client is looking for an accordion style apparatus shown in figure 1. The apparatus shall be manufactured out of off- white canvas. The top and bottom potion of the accordion apparatus shall contain openings for mounting. The apparatus shall meet the following requirements: Stitching and material shall hold/support a combined weight of 60 poundsMounting holes shall have stitching around them to prevent tear and material degradationEach accordion shall have four mounting holes: two on the top and two on the bottom pieceMounting holes shall be 0.5 inches wide by 0.25 inches high with tolerance of 0.125 inchesMaterial shall resist stretching and permanent deformation6 accordion openings (Note: only 4 shown in figure 1)Each cable opening shall have side wall height of 2 inches each for total expended height of 12 inchesSide walls shall be made out of cloth as well and collapse into the accordion when folded Dimensions of apparatus empty and folded are Length 14 inches , Width 9 inches, Height 2 inches with tolerance of 0.125 inches Figure 1 Cloth Cable HolderMANUFACTURING STATUS REPORTING REQUIREMENTSThe Manufacturer shall supply weekly updates on the status of the application development to the client. The Manufacturer shall be available for 1hr per week status phone call within 8 am to 8 pm CDT. DELIVERABLESUpon completion of the project the developer shall supply the following in electronic format (email is acceptable):MANUFACTURING STATUS REPORTING REQUIREMENTSThe Manufacturer shall supply weekly updates on the status of the application development to the client. The Manufacturer shall be available for 1hr per week status phone call within 8 am to 8 pm CDT. Upon completion of the project the developer shall supply the following in electronic format (email is cable holder Accordion Style Musical Cable Holder