Get Quick Quote From Supplier
DEAR SR WE NEED - HDPE / LDPE / LLDPEI ASK TO OFFER THE CIF PORT OF ITALYPAYMENT TERMS - ONLY ACCREDIT AT SIGHTSpecification:1. Virgin & Recycled 2. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade, 3. Pack: 25kg/bagVirgin & Recycled HDPE / LDPE / LLDPE granules 1. we are direct factory, different MFR or MFI are available for your different usage.2. good quality and reasonable price3. non-poteonods no smell adurless 4. it can replaced original plastic material, sometimes it can replace new material HDPE: HDPE cable materialPropertyUnitTypical ValueMass densityg/cm 30.941-0.959Melt flow Rate(190 centidegree /2.16kg)g/10min?1.0Tensile yield strengthMPa?19.0Flexural *?*@********************brittlement temperaturecentidegreeMAX -118Dielectric Constant100KHZ2.321MHZ2.31Loss Tangent100KHZMAX 0.00011MHZMAX 0.0001Volume resistivity OHM-CMMIN 1x10 15Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical PropertiesTest MethodNominal ValueUnitDensityISO 11830.921g/cm3Melt Mass-Flow Rate (MFR)ISO 11331.9g/10minHardness Shore Hardness (shore D)ISO 86845 Mechanical Properties Tensile ModulusISO 527-2175MPaTensile StrengthYield, ISO 527-29.0MPaBreak,13.0MPaTensile Strain(Break)ISO 527-2850%Modulus of ElasticityInternal Method250MPaThermal Vicat Softening TemperatureISO 306/A5089.0°CMelting Temperature (DSC)DIN ***08°CPeak Crystallization Temperature (DSC)DIN ***7.0°CHeat of FusionDIN ***10J/gElectrical Volume ResistivityASTM D2578.5E+15ohm cmDielectric StrengthASTM D14930.0kV/mmDielectric Constant (60Hz)ASTM D1502.20%Dissipation Factor (60 Hz)ASTM D1500.00050 LLDPE Properties Test conditon Test methodTest dataUnit Density 0.91MFI 2Drop impact strength ASTM D-***gElongation ,vertical/horizontal ASTM D-***/800%tensilestrength,thermal resistance ASTM D-***5/95Kg/cmelongation ASTM D-***%tensile strength ASTM D-***tensile strength,vertical/horizontal ASTM D-***/350Vicat softening point ASTM D-***3°Cmelting point ASTM D-***6°CTurbidity ASTM D-***%45 glossness ASTM D-***% MY POST -pv2001.50v