buy vinyl tiles

RFQ Description

2.01RESILIENT FLOORING MATERIALSA.Vinyl flooring rolls and tiles: Vinyl flooring shall be in compliance with the following requirements: 1.Construction: Non asbestos, Homogenous vinyl flooring with foam interlayer and polyurethane reinforcement in compliance with DIN 16952 or 16952/T3 2.Color: As indicated on Drawings3.Size: Tiles 600 x 600 mm, Sheets (Rolls) 2 x 25 meters approx.4.Total Thickness:Wear layer thickness 2 mm.Total thickness with foam interlayer 4 mm.5.Resistant to static electricity.6.Abrasion/Thickness Loss: 0.15 mm maximum; in Compliance with DIN ***.Wear by Castor: Suitable; in compliance with the DIN 54324.8.Flame Spread: Class B1 in accordance with DIN 4102 as well as BS 476: Part 7.9.Chemical Resistance: Resistant; in compliance with DIN 51958. 10.Light Fastness: Level 6; in compliance with the DIN 53388.11.Electrical Resistance: 1011 Ohm in compliance with ASTM D 257.12.Flexible no cracks under folding in compliance with BS6826.B.Pad and vinyl coating resilient flooring: Compliance with the following requirements: 1.Substrate Filler: As recommended by adhesive and vinyl flooring manufacturers; compatible with substrate.2.Adhesive: Type recommended by vinyl flooring manufacturer to suit application to substrate.3.Flooring Covering Pad Materials: Synthetic material, 20mm thick. Type shall be as recommended by vinyl flooring manufacturer and as approved by the Engineer to suit final vinyl coating material and intent of use.4.Flooring Vinyl Coating Materials: Synthetic vinyl coat material, Non asbestos, Homogenous, total thickness 2mm. Type and color shall be as recommended by vinyl flooring manufacturer and as approved by the Engineer to suit intent of use.5.Size: Manufacturer standard sheets (Rolls) sizes for pad materials and full space area for vinyl coatings.6.Total Thickness:Surface vinyl coat 2 mm thick and pad layer 20 mm thick.7.Resistant to static electricity.8.Abrasion/Thickness Loss: 0.15 mm maximum; in Compliance with DIN ***.Wear by Castor: Suitable; in compliance with the DIN 54324.10.Flame Spread: Class B1 in accordance with DIN 4102 as well as BS 476: Part 7.11.Chemical Resistance: Resistant; in compliance with DIN 51958. 12.Light Fastness: Level 6; in compliance with the DIN 53388.13.Electrical Resistance: 1011 Ohm in compliance with ASTM D 257.14.Flexible no cracks under folding in compliance with BS6826.C.Vinyl Base: Manufacturers standard weldable vinyl base with color matching the floor covering. Provide the Manufacturers matching end stops and preformed or molded corner units.D.Adhesive: Waterproof adhesive; type as recommended by the manufacturer to suit material and substrate conditions.E.Concrete Slab Primer: Non-staining primer; type as recommended by the manufacturer.F.Leveling Compound: Latex-type compound; as recommended by the manufacturer.G.Divider Strips: Where indicated between different floor finishes, divider strip shall be 32 x 3 mm thick bronze or aluminum, angle or T-Type with appropriate anchoring devices to substrate. vinyl vinyl tiles or roles