COTTON DRILL GLOVES

RFQ Description

Dear Sir, Are you doing Cotton Hand Gloves for Drilling purpose , qty is good. We require Cotton HAND GLOVES used to provide PROTECTION AGAINST COMMON INDUSTRIAL HAZARD LIKE PHYSICAL & CHEMICAL AGRESSION CAUSED BY BLADE CUT, PUNCTURE & TEARING ETC. UNBLEACHED CANVAS CLOTH 315 G/M2 with a tolerance of 19 g/m2KNITTED FABRIC FOR CUFFS-2/20 ALL COTTONCOTTON THREAD VERY GOOD QUALITY FOR STITCHING Gloves ahould be CLUTE PATTERNPALM CIRCUMFERENCE = 254 MM(MIN) PVC POLKA DOTS ANTI SLIP FOR GOOD GRIP PLACED ON *****, THUMB, & BACK OF FOREFINGER.MIN. POLKA DOTS= 32-40 PER SQ/INCH. DIMENSIONS:FROM TOP OF CUFF TO TIP OF SECOND FINGER 254 (MM)FROM BOTTOM OF CUFF TO TIP OF SECOND FINGER 203 (MM)CUFF LENGTH 50 (MM)FROM TIP OF INDEX FINGER TO CROTCH OF THUMB 127 (MM)FROM TIP OF THUMB TO CROTCH OF THUMB 76 (MM)ACROSS PALM AT CROTCH OF THUMB 121 (MM)ACROSS CUFF - OPENING 127 (MM)ACROSS BOTTOM OF GAUNTLET CUFF AT WRIST SEAM 127 (MM) THE KNITTED CUFF SHALL BE DOUBLE & SEWEN TO THE BOTTOM EGDES OF THE GLOVES. The Glove shall be inseam type with stitching on the inside as a protection.All stitching shall be of loack stitch type with the Good Quality thread.There shall be 6 to 8 stitches per 25 mm & the ends shall be securely back stitched. . An early action will be highly apprecaited. SANDEEP MAKKAD Mob:0091-98-101-92160 safety, industrial, drilling COTTON DRILL GLOVES WITH PVC DOTTED