Get Quick Quote From Supplier
Ladies and gentlemen! Interested in the possibility of manufacturing and delivery to Ukraine several prototypes carbide cutters round shape with the following parameters:- Material - an alloy for machining the ends of stainless steel plate thickness of 3-4 mm .;- The thickness of the plate-cutter to 6 mm. if the cutting part in the same plane, or up to 8 mm. in the manufacture of two-way capabilities with a cutting edge (the lower the better);- Sharpening angle of the cutting edge should take into account the slope of the setup plate of 1.0-2.0 tool relative to the treatment surface;- The diameters of the plates 32 to 44 mm. pitch diameter 32 - 36 - 40 - 44 mm .;- Mount the tool in the tool - a central screw hole M5-M8;- Best price-performance ratio.For the tests necessary for each diameter neskolko samples. In the case of positive test results will need to provide a batch of about 200 of each cutter diameter.With Uv. Mikhail Baranniko?E-mail: *@********************