Finger-Print Attendance System with soft-ware

RFQ Description

The device must support Finger-print, RFID-cards and passwords concurrently. The authentication time must be less than two Seconds The device must be able to store at least 10, 000 templates capacity for 1:N verification The device must have IP based connectivity to the central site, with IP address and gateway settings for LAN and WAN deployments All finger-print devices should be remotely manageable from the central site If the device has only POE, the external power injector (220 VAC) should be supplied along with every device. The device must have internal battery to retain the data in case of power failures. The device must have a storage capacity of logging one million transactions The device must contain LCD display to indicate the data, time, status etc. The device must capable of logging the arrival and departure date, hour, minute and second. The device must be capable of synchronizing the time between them The devices must have admin level access for configuring and making changes The verification results must be indicated through display and audio. The device must have provision to accommodate various working hours as per the site requirements. The attendance system should be built around Centralized Oracle database The data from all devices installed in the LAN and WAN segments must be collected at the central Site/Server The data collection at the central site should be done instantaneously and the data must be available at the Oracle data base at the Central site. The data from all the devices should be directly uploaded to the central data base automatically without any intermediate database or manual intervention. The software must provide a network monitoring tool to monitor the connectivity of all finger-print devices in the network, to identify and correct the network problems finger-print, attendance, finger-print attendance CCTV