Alloy Steel Sprocket Of Scraper Conveyor

Sprocket assembly is the transmission part of scraper conveyor and also belongs to wear parts, how to check the possible problems in use in time to deal with. The experience of Shuangzhi people in Henan province is summarized as follows:

First, check the wear and damage to avoid sprocket may be damaged or worn by the chain and scraper, and let the scraper chain in normal operation.

Determine the correct position of the sprocket on the frame to avoid the damage of bearing and floating oil seal or overload drive and overheating.

3. Check the oil level and find out the cause of abnormal reduction. Low oil level will cause overheating. (Failure of the bearing will cause damage to the frame and transmission parts)

Iv. When injecting new oil into the sprocket, wait for a period of time so that the oil reaches the bearing and operate at a low speed for 5 minutes to avoid the failure caused by overheating caused by the lack of oil in the bearing.

Bearing and gear lubricating oil does not condense.

Do not remove the sprocket in the downhole because the downhole environment is bad and cannot be maintained. Removing the sprocket is required for press tools, and it is easy to lose spare parts.

Seven, do not run without the installation of the chain, easy to damage the chain and scraper, also easy to lead to the hinge.

Do the above 7 points, in order to avoid the possibility of accidents. Henan Shuangzhi main sprocket components such as: 86SF0101, 86S010101, 86/10LL, 86/06LL, 510002000-01/07, 7T-34, 44ZA0102, 68LL02 and other models.