Get Quick Quote From Supplier
Hi I need the following padlocks, please advise on a quotationDescription as fololws: The nominal height of 40mmNominal padlock case 40mmThickness of padlock case 23mmNominal width across shackle 35mmShackle length 43mm4.8.1 The padlock mechanism shall be of the pin tumbler cylinder type, with anti-pick mushroomspins and security plates / pins.4.8.2 The number of anti-pick mushroom pins shall not be less than four.4.8.3 The number of anti-pick plates shall not be less than one.4.8.4 The pin springs shall be made of phosphor bronze.The cylinder lock shall:6.1.1 Manufactured out of solid brass;6.1.2 Be suitable for master keying and have key-alike facilities;6.1.3 Be supplied with 5 pin tumblers;6.1.4 Be supplied with re-tailoring cylinder screws and fixing plate, and6.1.5 The key shall be removable in the unlocked position of the cylinder.Padlock: LV, 8mm, Master Key, Yellow Qty. 600-Should be category 2, as per sabs 1533-The keys must be individually keys-Waterproof-Key Material must be brass-Key must removable when in unlocked positionPadlock: M/Reading, 8mm, Master Key, Orange Qty 600-Should be category 2, as per sabs 1533-The keys must be individually keys-Waterproof-Key Material must be brass-Key must removable when in unlocked positionEach padlock with 500 keys. The keys shall be uniqueTHey must be waterproof.