need polyethylene laminated cap

RFQ Description

Dear Sir, Good Day.Actually We are the leading manufacturer and supplier of Canvas Cloth, Tents, Tarpaulins Towel, Bed Sheet, Grey Cloth, Twill, Drill, Duck, C.R.T, all kinds of textile items and relief products (Hygiene Kits, Sleeping Mats, Blankets, Kitchen Sets, Jerry Cans, Food Bags, and Mosquito Nets). Mahroz Textile assist the relief projects around the world by providing cost effective and time efficient emergency in the production of wide-ranging emergency relief goods.so we need Polyethylene Laminated Cap.specifications are given below: Specification of Polyethylene Laminated Cap (2000 Pcs) A) Woven High Dencity Polyethylene (HDPE) Black Fibers fabric laminated on both sides with LDPE coating. Reinforced with 7.5 cm welded bands. B) UV Resistance UV Stablizer 7% since this material has no direct contact with the grain. C) Density Minimum 1200 Denier. D) Breaking Force Sample Dimension Mininum Breaking Force 10 cm x 20 cm Warp 160 kgf Weft 120 kgf 5 cm x 20 cm Warp 80 kgf Weft 60 kgf E) Width Lenth 28 feet+-3% (one side) 58 feet+- 3% (one Side) F) Centre Height Without mud Flap 18 feet - With mud Flap 20 Feet. G) Wall Height Without mud Flap 6 feet - With mud Flap 8 feet. I) Wieght of Fabric 250 g/m2 +- 5% J) Colour White Sun Reflective Band Colour Grey L) Tear Strength Minimum 100 Newton M) Welding Minimum resistance is 80% of the Original Tarpaulin tensile strength in weft. Other Conditions 1. Cutting on four corners of the base rectangle should be 6 ft from the top tapering position towards bottom. the cuts should be equipped with inch hem having eyelets at the distance of 8 inch with loop lacing system 0f 6 MM of breaded rope. Cut should be covered with 9 inch over lapping flap having Velcro for sealing. 2. One foot two vertical cuts on both longitudinal sides, above 3 feet from tapering height in the cap for fumigation purpose. the cut can be hem with Zip having 2 feet welded cover with velcro to resist rain water entry and gas leakage. Glad to hear from you soon Thanks and best Talat *@********************ies.com