Bester Auto/off Vacancy Sensor Wall Switch,110v-285vac, Energy Save Motion Sensor Light Lamp In White Color

Bester Auto/off vacancy sensor wall switch,110V-285VAC, energy save motion sensor light lamp in white color

Product Description

 Description:

 

Savings & Convenience in One Switch

The BS020 new  sensor switch combine occupancy & vacancy sensor into one motion sensor switch for energy efficiency,security, convenience, The 2 in 1 motion sensor detects Occupany and Vacancy in one room automatically turn lights on& off, enjoy hands-free convenience by never having to fumble in the dark looking for the switch.

 

 

Specification:

1: Power Source: 110V-285VAC

2: Detection Range: 180℃

3: Power Frequency: 50/60Hz

4: Detection Distance: 6-9m max(“≤24℃)

5: Ambient Light: ≤30LUX

6: Working Temperature: -20+40℃

7: Time-Delay: 15sec,1min, 3min, 5min, 15min, 30min, adjustable

8: Working Humidity: ≤93%RH

9: Installation Height: 1m-1.8m

10: Detection motion speed: 0.6-1.5m/s

11: Rated Load:

1800w/220v( incandescent lamp)  1000w/110v( incandescent lamp)

1000w/220v(energy-saving lamp)  800w/110v( energy -saving lamp)

 

Feature:

• [Motion Activated] : Sensor switch detects motion to automatically turn light on & off  based on the Occupany and Vancy in a room
• [Use advance components] : Motion sensor used advanced passive infrared sensor to detect heat emitted motion, the sensor is customizable with dials that can adjust time delay/ detection range/ ambient light level, and a switch to change between Occupany & Vacancy modes.
• [Occupancy & Vacancy mode change] : Occupany switch mode( Auto on/off), and Vacancy switch mode( Manual On, Auto off) allow you to customize the sensor according to your needs.
• [Time delay adjustable] : Light switch sensor feature adjustable setting: time delay from 15sec to 30min
• [Sensitivity Adjustable] :  It can change the sensitive of the sensor in Low sensitive/ Normal sensitive/ High sensitive
• [Ambient Light] : This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20Lux, when the room ambient light value is above 20Lux, the light won't turn on. less than 20Lux, will turn on
• [Wide- Application] : you can use the sensor in different occasions like entryway lighting/ room / garage/Luandry room
• [UL List]: have UL certification
• [Warranty]: two years

 

Wiring Directions:
1.Connect the Black lead to the Hot wire

2.Connect the Red to the Load wire

3.Connect the Green lead to the Ground wire

 

Adjustment

1. After xonnected the switch, the item defalt time-delay is 1min, Ambient Light: ≤ 30LUX, the switch is in Occupancy sensor mode.

 

2.Short press the big buttom, can turn on/off the light

 

3.Press the big button and hold for more than 4 seconds, can change the time delay, the red indicator flash:

Flash 1 time---15second

Flash 2 time---1min

Flash 3 time---3mins

Flash 4 time---5mns

Flash 5 time---15mins

Flash 6 time--30mins

 

4.Press the small switch and hold for more than 4 second can change the mode: the red indicator will flash:

Flash 1  time---Vacancy mode

Flash 2 time--Occupany 

Flash 3 time--Occupany mode without light sensor mode

 

5.Press the Big button and Small button at the same time, can change the sensitive of the sensor:

Flash for 1 time--Low sensitive

Flash for 1 time---Normal sensitive

Flash for 1 time---High sensitive

 

 Definitions:

1: Occupany mode:

The Load will automatically turn on when motion is detected and automatically turn off when the selected time delay has expired, the push button may be used to manually turn ON/OFF the load and time delay will aslo take effect.

 

2:Vacancy mode:

The Load will turn on Only when the push button is used and automatically turn off when the selected time delay has expired, the push button may be used to manually turn ON/OFF the load and time delay will aslo take effect, if the time delay has expired and the load turns off, the load will turn on again automatically if motion is detcted with in 30 seconds.

 

3: Occupany mode without light sensor:

The load will automatically turn in when motion is detected at the whole day even at the day time, and automaticaly turn off, automatically turn off when the selected time delay has expired, the push button may be used to manually turn ON/OFF the load and time delay will aslo take effect.

 

4: Flash -on:

Wehn the light turn on without anyone in the room

 

5: Manual-on:

A room where a person is required to turn the lights on upon entry.

 

6: Auto-on:

A room which automatically turns the lights on upn entry

 

7: Auto-off:

Occupancy sensors automatically turn the lights off when the timer expires from the last detected motion

 

8:Time-Delay:

The timer setting on the sensor from the last detected motion untill the lights are turned off

 

9:Flash-off:

When the lights turn off while the room is still occupied.

 

 Product image:

 

 

Enjoy ensrgy saving , enhanced safety & secutity , and added convenience

 

Energy Saving:
Save money on your energy bill by making sure unused lights are always turned on with a motion sensor switch, Vacancy mode's manual-on feature saves further energy by ensuring lights are turned on only when needed with a motion sensor switch, avoid having lights assidentally left on all day.

 

Security & Safety:

The sensor is the ideal choice for seniors, children, and employees when it comes to safety, making sure lights automatically turn on allows occupants to see where they are going, imporves visibility in an otherwise dark room and precents accidents.

 

Convenience:

Keep it hands-free as you walk into your home with graceries or into the laundry room or closet with a handful of laundery without having to manually turn your light on or off.

 

Custom Settings:

With advanced technology packed into intuitive and easy to use setting, you can easily the length of time lights will stay on or how sensitive the sensor is to motion, make your home smarter in one switch. 

 

 

Related Products

 Cilck below image to know more product

 

 

 

Packaging & Shipping

 

Company Information

Company Information:                                                                              

Establish in 2009 in ShenZhen, doing LED components, LED lighting, Motion Sensor Switch, OEM &ODM Product service. Nowadays BESTER is one of TOP 10 professional manufactures of LED components and Motion Sensor Switch in China.

Bester has her factory, and have necessary requirement for the production steps and test steps, we call it well regulated, So we can fast & flexible for customer requirement.

Our Advantage

 

Our Factory

 We have modern production lines with more than 200 professional workers, their rich experience of making products ensure efficiency and stability .

With two warehouses both are more than 500 square meters, to store the finished products, the space is sufficient and safe

All of our products are produced by our private molds, and we have lots of produce machines, with rich experience in ODM, we can do ODM for our customers with successful cases.