Three Wire Ce Rohs Approved Pir Motion Sensor Rz023-5a Occupancy In Wall Sensor Switch Occupancy Presence Sensor 220v

Description/Three wire ce rohs approved pir motion sensor RZ023-5A occupancy in wall sensor switch occupancy presence sensor 220V

The RZ023 uses advanced passive infrared sensor to detect heat emitted motion. The sensor switch can turn on a load and keep it on as long as it detects motion. The sensor will automatically shut off the load at the end of the selected time delay. The countdown of the selected time delay starts after the last motion detected. The sensor is customizable with dials that can adjust Time Delay, detection Range, ambient Light Level, and a switch to change between Occupancy/ Vacancy modes.

occupancy presence sensor 220V

occupancy presence sensor 220V /occupancy sensor wall switch Details Images

occupancy presence sensor 220V/occupancy sensor wall switch Specification

occupancy presence sensor 220V/occupancy sensor wall switch Installation Instructions

occupancy presence sensor 220V/occupancy sensor wall switch Adjustment
1. After connected the swith, the RZ023 will start to work after 10secont.
The defalt setting : time-delay is 1min, Ambient Light: 25LUX(±10lux), Occupancy sensor mode.
2. Short press the big button, can turn on/off the light.
3. Press the big button and hold for more than 4seconds,

can change the time delay, the red indicator flash :
flash 1 time--- 15second
flash 2 times--- 1min
flash 3 times--- 3mins
flash 4 times--- 5mins
flash 5 times--- 15mins
flash 6 times--- 30mins

4. Press the small switch and hold for more than 4seconds can change the mode :the red indicator will flash :
flash 1 time--- Vacancy mode
flash 2 times--- Occupancy mode
flash 3 times--- Occupancy mode without light sensor mode
flash 4 times---reset the defalt setting.

5. Press the Big button and Small button at the same time, can change the sensitive of the Sensor.
Flash for 1 time—Low sensitive
Flash for 2 time—High sensitive
Flash for 3 time—ambient light Value 15Lux
Flash for 4 time—ambient light Value 25Lux
Flash for 5 time—ambient light Value 35Lux
Flash for 6 time—reset the defalt setting

occupancy presence sensor 220V/occupancy sensor wall switch DEFINITIONS:

Occupancy mode: The load will automatically turn on when motion is detected and automatically turn off when the selected time delay has expired. The push button may be used to manually turn ON/OFF the load and time delay will also take effect.
* Vacancy mode:The load will turn on ONLY when the push button is used and automatically turn off when the selected time delay has expired. The push button may be used to manually turn ON/OFF the load and time delay will also take effect. If the time delay has expired and the load turns off, the load will turn on again automatically if motion is detected within 30 seconds.
* Occupancy mode without light sensor: The load will automatically turn on when motion is detectedat the whole day even at the day time, and automatically turn off, automatically turn off when the selected time delay has expired. The push button may be used to manually turn ON/OFF the load and time delay will also take effect.
* False-ON: When the lights turn ON without anyone in the room.
* Manual-ON: A room where a person is required to turn the lights ON upon entry.
* Auto-ON: A room which automatically turns the lights ON upon entry.
* Auto-OFF: Occupancy sensors automatically turn the lights OFF when the timer expires from the last detected motion.
* Time-Delay: The timer setting on the sensor from the last detected motion until the lights are turned OFF.
* False-OFF: When the lights turn OFF while the room is still occupied.

Bester, more than Best. Smart sensor, light up your life!

Company Information

Establish in 2009 in ShenZhen, doing LED components, LED lighting, Motion Sensor Switch, OEM &ODM Product service. Nowadays BESTER is one of TOP 10 professional manufactures of LED components and Motion Sensor Switch in China.
Bester has her factory, and have necessary requirement for the production steps and test steps, we call it well regulated, So we can fast & flexible for customer requirement.

Our brand is Bester and Rayzeek.

We have modern production lines with more than 200 professional workers, their rich experience of making products ensure efficiency and stability .
With two warehouses both are more than 500 square meters, to store the finished products, the space is sufficient and safe.

*Our company passed the ISO9001: 2000 quality management system certification.

*New products are launched every year, and old products are being updated

Advanced automation equipment

All of our products are produced by our private molds, and we have lots of produce machines, with rich experience in ODM, we can
do ODM for our customers with successful cases.

LIGHT SENSOR SWITCH

Our Advantage

Packing&Shipping

♦PACKING: Neutral packing with new carton or according to customer requirements.
♦PAYMENT: T/T,Paypal,West Union,30% deposit, 70% balance before delivery.
♦LEAD TIME: Sample in 1-5 working days and large order in 12-15 working days.
♦TRANSPORT: By DHL/UPS/FEDEX, Air cargo or Sea shipment.
♦PORT OF SHIPMENT: FuTian,Shenzhen,China.
♦MOQ: 1 piece. Providing DISCOUNT and OEM service for large order.

All products have CE RoHS certification, and some products have UL certification